Two Minute Build | Super Accurate Corner Jig

This is a simple and very accurate jig for drilling holes at a precise offset from any given corner. By using three drill bits of varying sizes, it's easy to precisely control the spacing of the corner hole for dead-on accuracy.

The key is to drill the first hole against the drill press fence, then rotate 90° with the drill bit still in the work piece. Setting a stop block against the rotated edge gives you a perfect corner offset in both directions.

Then, use two drill bits (the same size as the hole) with a third bit across them to act as a precise spacer.

[heriberthuber]

I love simple and elegant solutions like this :-)
Thanks for sharing!
Also I like your style of video. No unnecessary talking, straight to the point and nicely edited. Great!

[DIYMinded]

Great project! Thanks for taking the time to make and film it. Subscribed!

[robira]

What the heck do yo do with it?! A small example would have been nice.

[chadburke]

Like the idea and presentation. I can't figure out what the application would be though. What did you use it for?

[MrStrosty]

As an amateur woodworker I must super lost

[mohamedelgendy]

THANKS...Great idea!! Can I use the same concept for a doweling jig? I will work on it

[bmay]

I'm not clear on what this is for, but I've made similar jigs in my shop (I make bed frames, semi-production-style). If you ever need a jig like this that you'll use a fair amount, you might try using drill guide bushings. They're hardened steel and replaceable, so your bits won't widen the precision-placed holes in the jig over time, and (depending on the length of the bushings you use), they give better/straighter support for the drill bit. They are expensive though.
Anyway, the quality of your video is great! And none of that slow, boring business that too many people here do.

[MIWESTI]

EXCELENTE MAESTRO : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - ) : - )

[LanceTheBlueKnight]

Why not just use your drill press? You have a drill press.