Getting Started with SolidCAM iMachining - Video 5 (Part 2)

preview_player
Показать описание
This is Part 2 of Session 5 in Getting Started with iMachining Professor - an extensive tutorial series to provide you knowledge and practice with iMachining. The geometry in iMachining is defined as a pocket that can be open, closed and/or semi-closed (containing open edges). The pockets can contain internal chains treated as islands or used for safe tool entry. In this video, we will define a few examples of open pocket geometries. These include an open pocket, open pocket with island, and open pocket with multiple islands.
  1. SolidCAM & iMachining
  2. SolidWorks
  3. SolidCAM
  4. SolidCAM Professor
  5. iMachining
  6. SC2013
Рекомендации по теме
Getting Started with 0:09:57

Getting Started with SolidCAM iMachining - Video 1

Getting Started with 0:11:30

Getting Started with SolidCAM iMachining - Video 1

SolidCAM - Introduction 0:04:23

SolidCAM - Introduction to Imachining

SolidCAM iMachining Getting 0:17:36

SolidCAM iMachining Getting Started: The Tool definition and its effects on iMachining

SolidCAM iMachining Getting 0:06:01

SolidCAM iMachining Getting Started - Walkthrough: Define the machining of the center pocket

Getting Started with 0:08:43

Getting Started with SolidCAM iMachining - Video 2

SolidCAM iMachining Getting 0:08:20

SolidCAM iMachining Getting Started - Walkthrough: Create and define the CAM-Part

Getting Started with 0:11:09

Getting Started with SolidCAM iMachining - Video 5 (Part 1)

SolidCAM iMachining Getting 0:11:42

SolidCAM iMachining Getting Started: Defining the CAM-Part and adding an iMachining operation

SolidCAM iMachining Getting 0:14:06

SolidCAM iMachining Getting Started: Using the iMachining Technology Wizard

SolidCAM iMachining Getting 0:06:16

SolidCAM iMachining Getting Started - Walkthrough: Define the machining of the pocket ledge

Getting Started with 0:11:13

Getting Started with SolidCAM iMachining - Video 4

SolidCAM iMachining Getting 0:09:04

SolidCAM iMachining Getting Started - Walkthrough: Define the machining of the outside contour

Getting Started with 0:08:43

Getting Started with SolidCAM iMachining - Video 2

Getting Started with 0:11:30

Getting Started with SolidCAM iMachining - Video 1

SolidCAM iMachining Getting 0:07:34

SolidCAM iMachining Getting Started - Walkthrough: Verify the tool path and generate GCode

Getting Started with 0:10:08

Getting Started with SolidCAM iMachining - Video 3

Getting Started with 0:08:43

Getting Started with SolidCAM iMachining - Video 2

SolidCAM iMachining Getting 0:08:20

SolidCAM iMachining Getting Started - Walkthrough: Create and define the CAM-Part

SolidCAM iMachining Getting 0:02:13

SolidCAM iMachining Getting Started - 2D Example: Bottom face machining

Intro to SolidCAM 0:16:20

Intro to SolidCAM iMachining

Getting Started with 0:10:08

Getting Started with SolidCAM iMachining - Video 3

iMachining Getting Started 0:08:20

iMachining Getting Started - Walkthrough: Create and define the CAM-Part

Getting Started with 0:11:09

Getting Started with SolidCAM iMachining - Video 5 (Part 1)

Комментарии
Автор

 Hallo, in this video is a lot of similar details. Do you ave lesson how adjust a lot of pieces in SolidCAM? So I can mill 10 or more similar details (2.5d milling).
Thank you

haleavasan