Your choice for 3.5inch display? - LilyPi, WT32-SC01, MakerFabs' ESP32S2, Lolin32+ILI9488 -

Recently, many ESP32 products with a display have been released. It is probably the products that target this because there are many projects that use the display. In this video, I chose a few products and compare them with a focus on performance. (LilyPi, WT32-SC01, MakersFabs' ESP32S2, Lolin32+ILI9488)

[ESP32 LILYPI]

[Makerfabs ESP32-S2]

[WT32-SC01 Plus]

#Display #ST7796 #ILI9488 #ESP32 #WT32SC01 #Makerfabs #ThatProject

[HpsMexico-STmx]

Hello, great video !! Do you have some example using the wt32-sc01 ?
Maybe the makerfabs board whit esp32 in the version not s2 is more competitive whit the others in the same line talking about speed, i have very very bad experience whit makerfabs I use the boards capacitive 3.5 and are really slow, and no works good enough, maybe i will buy the last s2 but i think the Bluetooth is not build in the board .

Any way if you have more examples whit wt32 i will thank you so much
👍🏻

[yiptuckwai]

Thank you for the comparison between different 3.5 inch display, I am decided to buy WT32-SC01! Still hesitate between this and Makerfabs ESP32-S2 previously for making some project involves with display, very happy to see it has better in overall compared to Makerfabs product.

[nikthefix]

You can swap out the ili9488 TFT on the Makerfabs for a ili9481 IPS. A much nicer display with great viewing angles and it's a drop-in replacement. Just change the Lovyan panel instance in code.

[YigalBZ]

Thanks for the interesting video. I think 2 parameters are missing to compare: 1) How easy is to develop the GUI - very important for projects. 2) how many IOs are left. Also - is there any limit with using ESP-now while using the screen?

[RoseDeWittWish]

Bro please also share some good resource, for any project you makes, that will also be helpful!

[rarenu]

Hi, thank you for your comparison. I am not sure which one performs best in the last test. Please say your order of preference between WT32-SC01 and Makerfabs ESP32-S2.

[prashkd]

Excellent comparison. I am looking for an HMI display for my project. Can you also create a video on ease of designing GUI for each of these displays ? Or are you just using same LVGL ports for all 4 of them?

[SinanAkkoyun]

those displays only output 60fps right

[CodeMotionyt]

I have problems setting the WT32-SC01 could you help me with a tutorial about it?

[mastermoarman]

Thank you for this video. I'm trying to make a CAN digital dash for my microsquirt projects and I think this might fit the bill. Have you seen the stm32f7 models with the 4 or 5 inch display?

[CerebralDad]

Any guidance on the ili9488 and 8266 only displaying a white screen.

[tamasmodis]

I created a Bosch ebike diag display with the normal wt32-sp01. Perfect micropython firmware : . The CAN is jxltom/micropython-mcp2515 . The trick: connect mcp2515 via softSPI. Why the normal wt32-sp01? This has super gpio connectors. As I know, today this is the only suitable board for this purpose.

[pq]

Where did you get those demo codes? Could you please those codes? Or just tell some keywords.

[ftab]

I got a WT32-SC01 but I can't get it to work at 80mhz SPI, so it's significantly slower. (I did make sure it's using HSPI/IO_MUX) What's your secret?

[terdsakable]

Please help build an oscilloscope to use with WT32-SC01?

[ipadize]

can i connect an arduino to the esp32 s3 parallel via Uart?

[dimo]

R61529 may be a good choice, supports RGB565

[David_]

YAY is the code available for WT32-SC01 thanks...

[guomaria]

Hi, your video is quite good. is there any interest to know about other display? I already left message to you via FB:)