GRBL 1.1 - Step By Step Installation Guide to Flashing Arduino Uno!

Follow us on Instagram:

Subscribe to the DIY3DTech YouTube Channel:

Subscribe to the DIY3DTech OpenSCAD Channel:

[davidmasterson]

I had to zip the grbl file and then select open on the zipped grbl file but no problem.

[TylerHarney]

2022 - ARDUINO 2.0 is broken when trying to add libraries. You MUST download a Legacy version (I finally got 1.8.19 to work correctly) .

[vet]

You helped me back when I was getting my solar charge controller working VIA the wifi device and I thank you once again!

[jlondon]

I've downloaded the latest version of both grbl (1.1h) and Arduino IDE 2.0.3 at least 20 times and there is simply nothing under the unzipped master file that Arduino IDE recognizes. The grbl folder doesn't have the files as shown in your video but rather a subfolder named "examples" and that has two more subfolders both of which contain files A IDE doesn't recognize. I'm in a hamster wheel here but thanks for your kind efforts.

[CAKossack]

Thank you so much for SPEAKING and explaining what you are doing in this video! I don't think I can take another video with some awful 'stock music' playing on a loop. Great video, thank you!

[slash]

For anyone having trouble installing the library, do the following:

Extract the zipped folder (as shown in video) > Open extracted folder > Right click "grbl" > Click "send to" > Click "Compressed (zipped) Folder".

Then, as shown in video, go to arduino IDE > sketch > include library > add .zip folder > navigate to the zipped grbl folder > select > done!

[anaamehas]

After browsing many videos this one is the best. Very clear for beginners. Thanks a lot.

[stevelong]

Holy Moses, you saved my bacon. I stepped away from the computer for over a year. Health issues. I was about to throw this Arduino in the garbage and buy a new one. thank you so very much. You ROCK

[adzijderlaan]

Very good instruction video. Thank you for making this and your efforts. I followed your instructions and it works. Now I will install UGS.

[Teodoro-kkvm]

Thank you i've got all the information needed.

[omeeglich]

Thank you very much for this video! Helped me to get my Arduino Uno based board updated very easily! After a long search the only source to solve this task!

[bobbyboy]

once again you reign supreme, thank you. I need to talk to you regarding a z lift for lasers

[gonzaloozuna]

Buenas, para la gente que habla en español como yo, solo sigan los pasos de este video y podran actualizar su Grbl. Yo pude actualizar mi Arduino Nano para mi CNC y funciono perfectamente, Buen video.

[MrKydBarrett]

Super helpful. You have a great teaching style. Thanks!

[JaymeVanAuken]

Thank you very concise clearly spoken.

[sj-kpks]

Thanks very much for this video. Very clear and easy to follow - which was good, because I've never flashed an EPROM before. Worked fine - upgraded from 0.9 to 1.1 on my Shapeoko. Well, everything worked once I remembered to reinstall the original $ default values.

[giovi]

Thank You so much! I had to flash the firmware of my openbuilds blackbox motion control system (with changes in the config.h file) you helped a lot :)

[SergioProdi]

Is it possible to have the GRBL settings already saved in the library. So you can make multiple identical cards with the same values?

[stankersten]

Wow thanks helped me out. was Stuck at this step for like a week thanks

[mymagicsigns]

When I get to the grbl folder and click "Open" it simply onpens the folder and does not add it, if on the other hand I put it in a zip, it is adding it, but if I upload it to the arduino Uno and try to run the motors with the UGS app sometimes it works, sometimes it does not, and only for a few secconds, and I get all sorts of erros, missing gcode and other stuff. What am I doing wrong?