filmov
tv
PLATFORM BED - DIY Sprinter Van Conversion Ep.7
Показать описание
In this episode of our DIY Sprinter van conversion series, we build a floating platform bed frame that attaches to the sides of the van using rivnuts. We wanted to do our bed this way to allow for more room underneath the bed, without a bulky frame.
We also explain what rivnuts are, how to use the tool and give a demonstration (starts at 8:43 in the video).
Follow along on our journey while we build out a van, travel the world and Encompass Adventure!!
THANKS FOR WATCHING! :) Like + Comment +Subscribe + Hit the Bell
--------------------------------------------------------------------
Parts List for this Project
*(6) - Ikea Bed Frame Mounting Plates - Ikea Main Part Number = AA-740446-8 (this is the bed it comes on) and the specific part number is 116791 (These do not come with the telescoping supports so we called Ikea and they sent us 7 for free. They take about 2+ weeks to ship/receive, so plan ahead.)
*(2) - 2” x 6” x 8’ board
*(12) - 5/16-22 Bolts, (12) 5/16 locking washers, (12) wide washers
*(2) 4’ x 8’ - 3/4” Plywood; you can go sanded for a nicer finish, but the hidden nature didn’t seem worth the cost to us
*White Paint - Optional
Tools We Used On This Project:
Notes: Check the mounting height on the brackets. We wish we’d gone higher on the 2x6 so that the bed is higher.
Our Camera Gear:
--------------------------------------------------------------------
Some or all of the above links are affiliate links. If you buy something through one of these links, you won't pay a penny more, but we'll get a small commission, which helps keep the camera rolling. We only link products that we've used or diligently researched. Thank you so much in advance! :)
#vanbed #platformbed #vanbuild
We also explain what rivnuts are, how to use the tool and give a demonstration (starts at 8:43 in the video).
Follow along on our journey while we build out a van, travel the world and Encompass Adventure!!
THANKS FOR WATCHING! :) Like + Comment +Subscribe + Hit the Bell
--------------------------------------------------------------------
Parts List for this Project
*(6) - Ikea Bed Frame Mounting Plates - Ikea Main Part Number = AA-740446-8 (this is the bed it comes on) and the specific part number is 116791 (These do not come with the telescoping supports so we called Ikea and they sent us 7 for free. They take about 2+ weeks to ship/receive, so plan ahead.)
*(2) - 2” x 6” x 8’ board
*(12) - 5/16-22 Bolts, (12) 5/16 locking washers, (12) wide washers
*(2) 4’ x 8’ - 3/4” Plywood; you can go sanded for a nicer finish, but the hidden nature didn’t seem worth the cost to us
*White Paint - Optional
Tools We Used On This Project:
Notes: Check the mounting height on the brackets. We wish we’d gone higher on the 2x6 so that the bed is higher.
Our Camera Gear:
--------------------------------------------------------------------
Some or all of the above links are affiliate links. If you buy something through one of these links, you won't pay a penny more, but we'll get a small commission, which helps keep the camera rolling. We only link products that we've used or diligently researched. Thank you so much in advance! :)
#vanbed #platformbed #vanbuild
Комментарии