How to Install Your CeramicSpeed OSPW System for SRAM Red/Force AXS

Follow this step by step guide to mount your new OSPW System compatible with SRAM Red/Force AXS.

[CAPRAQUEENRC]

I use a Shimano GRX RD-RX400 rest derailleur on my gravel bike with a custom OSPW 11/13 wheels thinking going 13/13 but it actually makes a noticeable difference and my friends are actually starting to make OSPWs for their mountain bikes. And they love it as it actually effects shifting making it smoother and less likely to get effected by mud and grime on long dirty trails and rides. Everyone is so adamant that it’s only useful on road bikes they are missing a huge opportunity by expanding the line to gravel and mountain set ups. But their loss because of a company doesn’t have an open mind about expanding their lines then I’ll save up and get the equipment to make and sell them myself. I only haven’t because it costs lots of money for the equipment and materials to start and potential competitors but I’m starting to realize their is a whole market waiting to be expanded with no competition at all.

[stefanosernani]

Min 4:54 I can accomplish that smooth join, There is always a gap how did you manage to avoid the spring sliding on the side?? and to get that smooth?

[CeramicSpeed]

The symptoms indicate an adjustment is needed for when you use the Kickr trainer to account for small alignment differences from your normal wheel.

[sebiful]

There are 2 spring tension setting but in the video you clearly state set it back to low. Whats the advantage/disadvantage of the high setting?

[regishayme]

This video is uselful, but is it possible to have the reference of the specific tool?
Thanks

[triathlete]

When you aligned the CS plate to re-set the clutch, you say to “wind it to the back”, but you didn’t wind anything. Should the D shapes sit flush?
Thanks

[alexbroccoletti]

How many long the old chain ? Leave one ? Tx

[stefanosernani]

In the video is clear to see that are 2 levels where the cage could stop (in favor of the spring tension), one higher than the other one, (both are located in the original SRAM) but after installation we can not see where the cage is stopping, could you please let us know where the cage exactly stops ? also I am having troubles to properly close the cage eliminating the gap between the cage and the clutch. How much tension do you apply to keep the spring inside the clutch to eliminate this gap? thank you

[danielmanev]

hey I have the Ceramicspeed cage / puli on SRAM red e tap axs. when I put the bike on the kicker it makes very strange noises. what could that be? most of them in large gear.

[Michl]

Kann ich das Spezialwerkzeug einzeln kaufen?

[abefrancisco]

I was wondering if 12 speed cassette and rear derailleur ceramic over size pulley can fit???

[alexk]

Is it compatible with SRAM AXS eTap 52/39 chainring and 10-36T cassette, meaning will the chain length be enough when in 52 in front and 36 in the back?

[noahfontaine]

Nice vid. Would love to get it but cannot afford it😭😭

[bathlaG]

Why is the 10 ml bottle of Hydraulic oil provided and it does not seem to be used in this instillation

[rw]

which ospw would i use for sram red axs 12s etap? thanks.

[alexanderellis]

I’m running the sram red 2x and the system won’t allow the smallest cog and smallest chainring, do I just continue the same?

[matteochapelain]

can u say me where you buy the special tool that you use to dismantle the yoke of your derailleur ?
Thanks

[iansempowski]

Help so frustrated. there is no special tool in my box. just the pulley wheel assembly, oil and a two side 2mm hex key

[vjarizpe]

Hey, just ordered an OSPW but for eagle axs. I know there’s another video about mechanical eagle with a note about axs, but which one do we use?

[frankyfung]

I bought this a few months ago before sram released the 10-36 cassette. Will my OSPW support 36 teeth?