filmov
tv
6013 T Joint and Multi-Pass T joints
Показать описание
6013 T Joints and Multi-Pass T Joints,
Will be about the T-joint and the multi-pass T-joint. Part 2 will be about the Corner Lap joint and the lap joint.
In this video I will be showing how to weld T-joints and multi-pass T-joints with the 1/8 6013 welding electrode the angles I use to run them at. I also show the amperage i set my welding machine on to weld these rods.
Root(Basic single pass T-joint) I run at 125-135 amps with a 1/8 welding rod, with a 45 degree rod angle, and a 20 degree drag angle.
second pass I run at the same amperage, but use a 70 degree rod angle, with a 20 degree drag angle.
In my third pass I use the same amperage with a 30 degree rod angle, and a 20 degree drag angle.
-----------------------------------------------------------------------------------------------------------
I am using a Lincoln Ranger 225 engine driven welder as my power source
Radnor stinger
Radnor ground clamp
Lincoln 1/8 6013 rods
Videos with this electrode:
Metal used is 1 1/2" x 1/4" A36 flat bar stock
-----------------------------------------------------------------------------------------------------------
I get commissions for purchases made through links in this post.
WELDING LEAD AMAZON AFFILIATE LINK:
DENSE CONNECTOR AMAZON AFFILIATE LINK:
WELDING GLOVES AMAZON AFFILIATE LINK:
JACKSON SAFETY WELDING HELMET AFFILIATE LINK:
DEWALT ANGLE GRINDER AMAZON AFFILIATE LINK:
Incase you are new to my channel.
I am Adam and this is my welding channel Adam's welding, i have been welding for a few years now and finally started up a channel on youtube to show some of my personal work and maybe teach some of you a tip or trick i have learned along the way. I hope you enjoy my channel! If you like my channel like, comment, subscribe, and click the little bell icon to be notified of my future videos!!!
My welding rig is a 1990 f350 7.3idi dually, with a lincoln ranger 225
-----------------------------------------------------------------------------------------------------------
Playlists:
Will be about the T-joint and the multi-pass T-joint. Part 2 will be about the Corner Lap joint and the lap joint.
In this video I will be showing how to weld T-joints and multi-pass T-joints with the 1/8 6013 welding electrode the angles I use to run them at. I also show the amperage i set my welding machine on to weld these rods.
Root(Basic single pass T-joint) I run at 125-135 amps with a 1/8 welding rod, with a 45 degree rod angle, and a 20 degree drag angle.
second pass I run at the same amperage, but use a 70 degree rod angle, with a 20 degree drag angle.
In my third pass I use the same amperage with a 30 degree rod angle, and a 20 degree drag angle.
-----------------------------------------------------------------------------------------------------------
I am using a Lincoln Ranger 225 engine driven welder as my power source
Radnor stinger
Radnor ground clamp
Lincoln 1/8 6013 rods
Videos with this electrode:
Metal used is 1 1/2" x 1/4" A36 flat bar stock
-----------------------------------------------------------------------------------------------------------
I get commissions for purchases made through links in this post.
WELDING LEAD AMAZON AFFILIATE LINK:
DENSE CONNECTOR AMAZON AFFILIATE LINK:
WELDING GLOVES AMAZON AFFILIATE LINK:
JACKSON SAFETY WELDING HELMET AFFILIATE LINK:
DEWALT ANGLE GRINDER AMAZON AFFILIATE LINK:
Incase you are new to my channel.
I am Adam and this is my welding channel Adam's welding, i have been welding for a few years now and finally started up a channel on youtube to show some of my personal work and maybe teach some of you a tip or trick i have learned along the way. I hope you enjoy my channel! If you like my channel like, comment, subscribe, and click the little bell icon to be notified of my future videos!!!
My welding rig is a 1990 f350 7.3idi dually, with a lincoln ranger 225
-----------------------------------------------------------------------------------------------------------
Playlists:
0:21:01
6013 T Joint and Multi-Pass T joints
0:05:34
6013 Stick Welding Problem Fixed
0:06:20
Fillets Welds | Multi-pass 7018 All the Way Out
0:09:41
3 Stick Welding Electrodes Compared: 6013 vs 7018 vs 6010
0:03:21
6013 Vertical Electric Welding Tricks
0:21:19
STICK WELDING for Beginners | SMAW 6010 & 7018
0:07:25
stick welding (SMAW) 2F Tee-joint E6013
0:06:06
Stick Welding: #1 Beginner Mistake and How to Fix It
0:05:31
SMAW 7018 Horizontal 2F Tee | Welding Tips & Tricks #Welding #Tutorial #ArcWelding
0:01:29
How to weld electrode 6013 descending
0:06:21
Stick Welding Amperage
0:06:06
Stick Welding: How to Read the Puddle
0:00:59
Learn how to weld a 2f position #ArcWelding
0:06:21
Learn how to weld in 3F position | used 6mm plate and E6013 stick
0:05:20
Stick Welding Overhead 4f Multi Pass Tee 7018
0:06:06
2F multi pass stick welding 7018 and 6010 T-Joints
0:02:22
Stick welding T-joint fillet weld 1/8' e6013 smaw
0:03:11
6013 Fillet weld
0:02:30
The fastest way to learn electric welding is vertical welding
0:02:50
Stick welding beginner techniques 6013 electrode vertical up and descending down
0:05:09
7014 Stick Welding Multi Pass T Joint practice
0:05:16
Overhead E6013 stick welding with positive and negative polarity explained!
0:13:50
Stick Welding Basics - How to Run Straight Consistent Beads
0:01:50
Many people did not know this welding technique and did not tell us about it
Комментарии