The three easiest ways to weld thin metal 1.5mm !! Any newbie can!

Three simple ways to weld 1.5mm wall thickness square pipe, 2mm manual arc welding, these methods are sure to come in handy, especially if you are a beginner welder!!

[dustyluce]

Ok so 6013 is a light penetrating electrode. Its specific uses for sheet metal and other thin metal welding purposes. I was taught to just drag the puddle with the right electrode angle. No oscillating or stacking of the weld puddle, it leaves porosity behind in deposited weld metal.

[Blue-Scorpion]

The best weld is the one that is not interupted because the protection layer prevents from dirt / oxigen penetrating into the weld. In other words, its bad to weld on top of existing slag in example 3 from this video.

[kloktr]

Exactly same here, I'm much impressed . Appreciate your skills 👌

[cersosi]

So, should have a spacer for proper penetration. Never do #3 because of slag in your welds that can contaminate it and cause cracking. Plus use a 3/32 rod not 1/8 or whatever you used. If you’re going to do welding vids, people have to get good advice

[ricilgrosjean]

Merci d'avoir montré les paramètres d'Amperage et façon de soudé pour que nous novices pouvons apprendre la soudure qui est une profession a part entière 👍

[b.p.rwebber]

That first weld you done shows you got some serious skills full bead on thin steel no blow through. Impressive the other 2 look like crap compared to that first weld all day long.

[weld_dx]

Can you tell me a technique for shooting this video? and what camera do you use.

[alekseykazakov]

Кто свой секрет показывает тому пусть будет счастливчик и Большой ЛАЙК

[catalin]

Welding 1.5 mm thick metal is not too hard.Anyone who has decent welding skills can do it.
Try and weld 1mm material or thinner with stick and that’s when the fun starts 😄

[jimwulstan]

This man uses the electrode as an artist uses a paint brush. Surely the most important thing is the amp setting.

[corneliusdrogo]

Hi, what amperaqe was the machine set to, was it DCEP ?

[스윗초코-by]

마지막에 테크놓는방식은 가접을위해서쓴다면 어느정도인정하지만 풀용접으로쓰는건 용입이안되기때문에 아닌것같아요~~

[ИванИван-тц]

Хорошее видео, НО, ток и диаметр электрода показывай, по марке не сразу поймёшь!!! 😁😉👍

[davidxiu]

I bought a portable 200 amp welding machine. it looks very easy watching videos, the electrode stick melt like butter. but when I tried, the stick stucks on the metal, etc I cnt even explain. I also tried on every ampere settings. but I just cnt do it. is it because the electrode stick has expired or something else, . 😢

[llukenathan]

hi beginer stick welder here. Is 60 to 90 amps to hot for a 1.5mm stick weld? I seem to be melting off the metal tubing and it is very frustrating to try to fill up the holes:(((

[nilomyki]

Man you were going good 'till you did that last weld (the first two are the proper techniques).

[EricPeralta]

Al parecer una vez, que agarra la llama tipo soplete, se va fundiendo el metal de la varilla y se hace como un pasta a alga temperatura, y con la misma vas rellenando y se va enfriando rápido...

[BENGLASBERKAHCHANNEL]

Kawat las menggunakannya ukuran berapa mm

[stealhty]

For very thin metal like mufflers I use #3 to avoid making holes

[МирагорВ]

Обязательно ли одевать маску сварщика при просмотре этого видео? Боюсь испортить зрение