Review: Honeywell T6 Pro Wi-Fi Programmable Thermostat - Plus Honeywell Home Mobile App

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

Great video. I was told 4 months ago when my new AC unit was installed along with this thermostat that it does not
show the temp once the unit goes to sleep. Told this by both techs. I watched 2 minutes of your video and was able to
program it to read temp 24/7. Great info. Thanks again

DFMDFS
Автор

Hold down the menu button for five seconds and scroll through device settings and turn the auto change mode on, and you can set your heat temp and cool temps for automatic

jaredricker
Автор

I just bought a house the thermostat was already installed same ☝️ one. But Im trying to sync to the app so I can manage it in my mobile. I have honewellhome app but it doesn’t work. What can I do?😊

catherinesmith
Автор

This thermostat has a setting for heat and cool as one mode.
That’s in your ISU under “system changeover” yours is likely set to “manual” and for that feature you’ll need to enable it to “automatic” after that you’ll have a 4th setting named Auto that does both Heat and cool.

rickwaldo
Автор

I just installed the t6 2 day. Ithaca actual install was straight up. However, I spent over an hour trying to find the battery back up compartment. Tge Honeywell video even stated that batteries were not required but suggested. After exhausted search of videos this model has an internal battery that gets recharged by the power from the c wire. Also, the app to download is now resideo. Works great now. Just a heads up.

haroldbubb-ucqq
Автор

The schedule on this thermostat sucks super confusing.. im a truck driver and hardly home i dont want my ac or heat coming on when im gone i just want too have it come on a few hours before i get home from work too save on energy.. there is a ventilation mode on some of these and a boost feature where it will blow air harder and faster and cool the room and house down way faster a lot of people dont know about this feature i figured it out but its only available on my main floor.. my basement thermostat same one and brand doesn't have that feature idk why but i definitely need the boost mode on the basement level it would help cool it faster it get humid down there in the summer..

cryptonator
Автор

I'm confused because after you enable auto mode, you can setup up a schedule with this thermostat that will switch between cool and heat.

elidc
Автор

I watched the video a couple of times and made sure that I am following instructions and I have a question; After a power failure during a thunderstor, the AC kicked back on and all was good untill we noticed that it is colder in the house than usual while the thermostat was set to 74 degrees, i eventually cranked it up to 77 wich is still cold but 78 is not comfortable. I tried resetting the thermostat to factory settings and still doign the same thing. I downloaded two apps on my phone to read room tempreture and they both read lower by 3 to 4 degrees. My thermostat is Honeywell pro. Hopefully i can get some help,

Smudg
Автор

Good luck on setting this thing up. My first T6 Pro wouldn't connect to my network. I was able to call and talk to a man at Honeywell. Stepped me through the process OK. After several years this thermostat went out so I purchased another T6. The instructions told me to put my phone in airplane mode and go and log into the thermostat. I was in airplane mode which meant I could not get WIFI or blue tooth. I called Honeywell support line and the wait was 2 1/2 hours. I had my HVAC company come out and try to set it up. They did not have any luck getting this thing to work either.
Right now I am using it manually. Buyer beware of getting this thing to work.

dhansel
Автор

Can you show me how to change the battery? I’m getting a low battery alert and can’t find how to get it off the wall

jackieparra
Автор

My keeps saying 58% humidity and it is 78 in the apt but set at 71 and it is not cool in the apt.

marinarbekka
Автор

The auto mode you wanted can be enabled as an option in the advanced menu. A piece of tape would solve your camera red light issue.

bryanclay
Автор

I am locked out my husband messed with the thermostat and I don't know the pin?

namaste
Автор

Hey Luke. All I wanted was how to set the AC ON. And you never showed how

wendywood
Автор

Installer initially setup the lowest temperature to be 68 degree as default, is it possible to adjust to be 60 degree?

yjma
Автор

Hey buddy. Trying to connect my pro 6 to my zigbee erro system. The Alexa app says the pro 6 has to 1st be setup in the Honeywell app but the Honeywell app doesn’t show the pro 6 zigbee as an option to add, only the WiFi pro 6. Thoughts?

Tworth
Автор

Does this Thermostat have batteries? Also I am having issues trying to shut off the back light. It is staying on for some reason. Thanks Kim

kimberlywaller
Автор

I just have this unit installed in my home yesterday and the app is showing no data in the runtime. Can you tell me why and what I need to do to get it to show? I had no luck with their support center.

annaleydens
Автор

How do you take the lock off of you don’t know the password my kids lock me out

nickoya
Автор

What app did you use to download? There's tons of them and not sure...

clayperry