Choosing the Right Catch Can For Your Ride: Tech Tip Tuesday

Shop Catch Cans

FOLLOW US:

[seastacker]

Very nice guys. That metal mesh stuff in the bottom of the new one looks a lot like what they used to use in the old oil bath air filters which makes perfect sense as it served much the same purpose.

[KCadbyRacing]

You guys (racers) continuing to innovate High Quality parts is why I'm a huge fan (and have said before), I use and recommend your RIFE Sensors to all of my friends and tunes...

[MikeWolf-]

I have a street driven 427 BBC @ 500rw (NA) with Holley Stealth fuel injection (HP not Terminator) cutting out the smell would be great. Would the new style benefit me? My oil smell is moderate. I have definitely had more smell with looser engines.

[paulthompson]

hi many 4cyl gas use 7/16--1/2 inch pipe work
modern 4-6cyl Turbo direct inj diesel use 5/8--1inch pipe work
Its very important to connect both valve covers to CC as u have said .
Restrictive c/cans do blow gaskets /seals . A blown rear main sseal is evident of that . 60, 000 miles on my truck

[OliviaZpo]

Your videos are like little masterpieces. Thank you for your talent and effort.🚁🍑🎳

[bobhilly]

I’m building a 65 impala I’m gonna ls swap it and eventually put a turbo on it, mostly gonna be a street machine, might see a drag strip every once and a while, which catch can should I use

[imsatanscott]

I got a 200 000 mile 4.8 with self clearanced rings, an ali bingbong turbo, 30 pounds on scramble and no blow off valve. You make these in Herby Kurby size?

[jordantrujillo]

I was hoping you were coming out with something like this!!

[--_DJ_--]

I think we need a better explanation of how that fresh air tube works, or I am just missing something obvious. I can see how it could work at high vacuum levels (more pull post throttle blade than pre throttle blade), but what stops it from becoming a feed from the valve cover to the intake when manifold vacuum is low, such as WOT, which would be when crank case pressure is the highest and intake vacuum (pre throttle blade) would be the highest?
Is there a check valve fitting for the fresh air tube?

[elbaclati]

Do you have to empty the can every so often or do you plumb the can back to the oil pan some how?

[dondotterer]

Awesome. I'm guessing the 2 stage would be the one for a small block Chevy 600hp N/A carburated drag and drive street car?

[lawnpros]

We need a catch can that will fit on a motorcycle.

[Wonderwrench]

Engines will last longer with PCV also so its a win win!

[goball]

Wont the fresh air line from the one valve cover to the intake tube flow backwards when pan vac is high? Aka push air / oil out of that valve cover into the intake?

[PrimedEvil]

Maybe im confused but having a " fresh air " line from the intake to the valve cover be sucking the fumes from the VC to the engine?

[valvesix]

Can you add this video to your tech tip Tuesday Playlist?

[baddaddy]

Will motion dip it’s toe into the intake manifold world for the more common engines?

[OliviaOmniko]

Your videos are an example of how to make quality and attractive content. Keep up the good work!😱🐵😎

[SophiaEfini]

Thank you for your videos! They are always so high quality and interesting. I can see that you are professionals.🥅🥌🐝