How to change front suspension arm on NISSAN MICRA K12 [TUTORIAL AUTODOC]

Показать описание

How to change front suspension arm / control arm on NISSAN MICRA 3 (K12) 1.4 Hatchback 2003–2010 [TUTORIAL AUTODOC]

Suspension arm on NISSAN Note I (E11, NE11) (Baujahr 01.2006 - 08.2013) cars should be changed, as a rule, according to one and the same procedure. However, there can be slight differences due to specific features of the vehicle design.

📲 Buying via app is always cheaper than on the website!

00:00 — NISSAN MICRA K12 – suspension arm / control arm: step-by-step replacement tutorial
00:14 — Raise the car
01:25 — Remove the control arm
01:52 — Install the new control arm
02:59 — Tighten the ball joint fastener
03:27 — Screw in the wheel bolts

If you're interested in our content, you can watch our other video tutorials:

*📢 Find AUTODOC on social media:*

_#autodoc #autodoctutorial #autodoctips_

*Disclaimer:*
This video is intended for informational purposes only and does not guarantee achievement of a specific result.

It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.

This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.

© 2023 AUTODOC SE All rights reserved