How to change front suspension arm on NISSAN QASHQAI (J10, NJ10) [TUTORIAL AUTODOC]

How to change front suspension arm / control arm on NISSAN QASHQAI +2 1 (J10) 2 SUV 2006–2013 [TUTORIAL AUTODOC]

Suspension arm on NISSAN X-Trail (T31) (03.2007–07.2014) / RENAULT Koleos I (HY) (09.2008–...) / RENAULT Megane II Saloon (LM) (08.2003–...) / RENAULT Megane II Hatchback (BM, CM) (09.2002–12.2009) / RENAULT Megane II Sport Tourer (KM) (08.2003–08.2009) cars should be changed, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.

📲 Buying via app is always cheaper than on the website!



0:00 — NISSAN QASHQAI (J10, NJ10) – suspension arm / control arm: step-by-step replacement tutorial
0:28 — Raise the front of the car and secure on supports.
1:30 — Remove the fastening bolt.
1:44 — Disconnect the ball joint from the steering knuckle
3:04 — Install a new arm.
3:53 — Tighten the ball joint fastener.
4:54 — Treat all joints of the arm.

Was this video helpful? Give it a thumbs-up and share it with your friends!

Have a look at other videos on our channel:

📢 AUTODOC on social media:

#autodoc #autodoctutorial #autodoc_specialseries

Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.

It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.

This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.

© 2020 AUTODOC GmbH All rights reserved

[deanyeandle]

Best videos ever my kind of lady all the videos give everyone all the information torque wrench settings we all need and give people the confidence to do the job thankyou

[lancestancliffe]

Excellent tutorial, I have this to do on both sides and gives me confidence to do it, thanks also for the torque settings one of the most important aspects when working on your own vehicles. ;-)

[george]

Is it not necessary to laden the suspension arm before tightening all the arm bolts to torque spec?

[robertstewart]

Is it possible to remove or repair the captive nuts on the subfram where the front bush bolts on? Managed to damage the threads on mine

[nukeourplanet]

Great video, I'm tackling this job tonight with confidence now!

[rasmadrak]

Looks easier than it was to change the spark plugs... :)

[thanukiru_]

It's really use full
Thanks you very much

[Netryon]

Fast response time, it's what we need every second counts. Should be possible to change it easier, specialized tools not mandatory.

[rz]

Great video but one mistake: fully tighten bolts when wheel is back on a ground or in a driving position. If you tighten them too early bushings will wear off very quick..

[secondfirstsecond]

what is the sprayer? is it just normal paint?

[jamsstar]

Shes done something I couldn't do today 😂 but you can do a wheel bearing without breaking the Lower one of those days today

[TheElad]

what's the purpose of spraying wd40 before putting back a bolt? what's the purpose of spraying copper grease on the bolt in the end?

thanks

[bazasulli]

Only Nissan would make you need to disconnect the droplinks to get the arm off. It's ok when you are not in a rust belt.

[jamsstar]

I'm having a bad time with a transporter drive shaft, do you wanna do it 🤔😂

[kevinbradley]

Using non-impact sockets with a buzz gun!
Applying copaslip to wheel mating face!
Tightening up suspensi

[chiptrixx]

She has to learn to use the tools right, otherways her hands an wrists vil be damaged over time, or maybe in one wrong move. And these big impactools, come on, and lower the lift as well,

[kevinrowson]

Such a shame you ruin all of your videos by putting such terrible music over them