How to Install Gutters on Your House DIY

How to Install Gutters on Your House DIY - I show you how to install gutter end caps, splice two gutters and install a downspout adapter all DIY without any special tools. You can save a lot of money doing it yourself!

DON'T FORGET TO LIKE COMMENT AND SUBSCRIBE

Top videos you need to see:
How to Beat High Lumber Prices 2021 - DIY Aluminum Patio Cover Installation
DIY Shed Build Time Lapse (12X16)
DIY Hanging Garage Shelves

As an Amazon Associate I may earn from qualifying purchases and no extra cost to you.

OSI GS121 Clear Gutter and Seam Sealant
Arrow RSA1/8IP Short Aluminum 1/8-Inch Rivets
Rainware Supply 2x3 Aluminum C Style Gutter Drop Outlet
Quick Screw Gutter Hangers 5 Inch- 25 Pack - 5 Inch Gutter Clips
SCREWIT Brand #8 x 1/2 inch Gutter and downspout Colored Zip Screws with 1/4 inch Head
Rainware Supply 5-Inch Aluminum End Caps for K Style Gutters

WannaBFree Amazon affiliate link

00:00 Intro
00:25 Gutter parts and supplies I used
01:42 How to install gutter end caps
04:08 How to join two gutters with a seam
07:26 How to install downspout adapter
09:28 Completed gutters
11:15 How to install hidden hangers on gutters
12:06 How to hang the gutters DIY
12:40 Completed gutter project

Link to my other channel with lots of camper van and travel videos

[CalvinJ]

Thanks for taking the time to share this process. I need 1 gutter over my Dads deck. He's out of town and I want to surprise him when he gets back. I would usually ask his advice on how to do this right, but that would ruin the surprise. Thanks for standing in and showing the process so i can put up this gutter with confidence that he'll be happy with the install and function. Much appreciated.

[rock]

I have been a Lic. Gutter Contractor in CA since 1977 / Some of these DIY people are not too bad / From a 1 to 10 / 10 been really good I would give this person a 7 / When he lapped the 2 gutters he installed the cut piece on the outside ( wrong ) and the hole on the outlet cup do not need to be there / some of his advice will help / but Josh who is also on YouTube / I think is the best

[FamilySmith]

I really like how you show close ups of the detail and instructions you were giving. That was really helpful! Thanks! Also, thanks for describing this like you were speaking to a regular person, not giving professional jargon like you were speaking to another professional who does this for a living. I appreciate that.

[geraldfer]

24 inches is joist width...good rule 👍🏿👍🏿👍🏿Thank you

[livetoinspireall]

You can just inser the sealant in seam of the end cap and then put it on the end of the K style gutter. Once it is in place use a pair of pliers to crip the metal valley of the end cap to the gutter. When you are done hanging the gutters, go back with the gutter sealant and put a thick bead on inside

[Tseriblosom]

Very nice presentation with a thorough, concise and precise easy to understand methods of explanations. Well done, indeed.

[hookahb]

Thank you brother, i appreciate this video, well done..I need to replace a section with a wider gutter, but did'nt really know how to go about it..I do now after seeing this well put together video..

[kurtbilinski]

My concern about joining two sections that way is having it misaligned such that the junction ends up either high or low. One thing that could help is to assemble it on a flat garage floor.

Also, regarding the downspout, it can also be mounted from below, avoiding having the flange above, where the water has to build up in order to get up and over it.

About working the aluminum, there are "left" and "right" aviation snips that are extremely handy depending upon the direction of the curved cut. If you have a hole saw, that can help save effort, and I won't mention Clecos, used in aviation, which are invaluable for holding alignment for drilling rivet holes.

[indsrnty]

Ok. I hit the like button.
Thanks for the DIY walk thru.

[wesjohnson]

When cutting with tin snips don’t close the snips all the way on the tip of the snip’s and you won’t have those jagged edges to file off.

[ociellerma]

Muy buen video gracias por compartir ideas con todo me sirvió demasiado a mi en lo particular le escribo desde el estado de Texas..!!

[jakeowens]

Good info. Scary man with those tin snips

[spiritualwisdom]

found your channel from the windshield fix. nice channel. thanks.

[kansascowboy]

Nicely done 👍🏻
I think I have the confidence to do the gutter on the front of my garage
Thanks for sharing

[Kyle-evfk]

Looks good. Are you dropping the down spout off the house into the shed gutter?

[MushInSkull]

Nice instructions for assembling the gutter length.

However, this lacked clear instructions for actually installing the gutter to the edge of the roof. Is it just screwed into the wood? What's the best way to determine the drop/slope of the gutter? 🤔

[JosueGarcia-ksxf]

Great video .
Watchin from MD.
Is there another sealant that dries fast sir?
I need to install them the same day.
Thank you.

[Perly]

Did you tuck the gutter behind the drip edge? Did your hidden screws go into the facia below the drip edge or through it? Thank you.

[stoneyja]

Looks great. but one question. At about 12:58 it looks like there some deformities in the back of the gutter. Did you get leaks in there?

[graphguy]

Great video... but I hate those Home Depot / Lowes crap K profiles. My custom ones are in a need of replacement (2002), but the quality of the big box ones are pathetic.