DIY Closed Loop CNC Control #8: Spindle Encoder

preview_player
Показать описание
The eighth video in a series documenting my experience building a closed loop CNC control for my mini-lathe.
  1. Franco
  2. mach3
  3. mach4
  4. centroid
  5. cnc12
  6. acorn
Рекомендации по теме
DIY Closed Loop 0:06:32

DIY Closed Loop CNC Control #1: The Enclosure

DIY Closed Loop 0:08:37

DIY Closed Loop CNC Control #2: Power Supply

Closed Loop Stepper 0:17:00

Closed Loop Stepper Motors for CNC machines

Closed loop stepper 0:03:15

Closed loop stepper guide ⚙️📕 (Cloudray CLE23)

Closed loop stepper 0:10:46

Closed loop stepper motors -- very impressive

How to Choose 0:13:23

How to Choose Axis Motors For Your DIY CNC Conversion Project

FoxAlien CNC Router 0:01:23

FoxAlien CNC Router Machine Masuter 3s- The First Nema23 Closed Loop CNC under $1000

MKS SERVO42C Closed-Loop 0:14:58

MKS SERVO42C Closed-Loop Stepper: Tests vs Servo with Field-Oriented Control and TMC2209 Open-Loop

DIY CNC Electronics 0:18:17

DIY CNC Electronics Guide

Installation Guide for 0:04:47

Installation Guide for Closed-Loop Stepper Motors on Vortex Rotary Axis for LongMill & AltMill C...

Watch Me Build 0:32:06

Watch Me Build Closed-Loop CNC Electronics in 25 Minutes

DIY CNC: Nema34 0:00:29

DIY CNC: Nema34 12Nm Closed Loop Stepper/ 2Phase HBS860H Hybrid Drive/ 400W 60V Power/ Mach3 Control

Closed Loop vs. 0:11:58

Closed Loop vs. Open Loop Stepper Motor Driver (HBS860H vs. DM542A)

What's the best 0:39:25

What's the best NEMA23 Stepper/Servo? | Electronic Leadscrew Part 24

DIY Closed Loop 0:06:20

DIY Closed Loop CNC Control #4: Power Up Acorn

World's FASTEST grblHAL 0:02:43

World's FASTEST grblHAL Motion Controller System | E5X MCS T4.1 By Maker Store

My CNC Router 0:05:50

My CNC Router Build - 11) Upgrading to closed loop steppers

Mini Closed-Loop DC-Servo 0:00:08

Mini Closed-Loop DC-Servo on LinuxCNC-RIO

DIY CNC Motor 0:16:32

DIY CNC Motor Upgrade

DIY CNC 010 1:22:00

DIY CNC 010 - Closed Loop NEMA Wiring and Mach3 Setup

Schrittmotor mit Arduino 0:44:33

Schrittmotor mit Arduino steuern | Closed loop CNC Steuerung mit CNC Shield und Arduino | Estlcam

Stepperonline CL57Y Closed 0:09:31

Stepperonline CL57Y Closed Loop Stepper Driver & Motor

Meet the Cheap 0:02:57

Meet the Cheap Servo Stepper motor Close-loop | Sequre Stepper motor

Longs Motor HBS57 0:16:44

Longs Motor HBS57 Closed Loop Stepper Driver Setup and Programming

Комментарии
Автор

Hi Franco, Can provide a link for the DB9 adapter plug, I assumed I would find on Centroid site but not finding it.

billb
Автор

Curious did you run a 1:1 belt drive to encoder?

glennedward
Автор

These Omron E6B2-CWZ1X encoders sell for $25 on eBay but I highly doubt they are genuine. Where did you get yourse? I checked on Mouser and it is $345.

VId_Kok
Автор

Any need to set parameters if you’re using a belt drive or are you running 1:1 off the spindle? ...what is the name or part number of the connector you had shown? Thanks.

glennedward
Автор

Why are you multiplying the 2000 p/r by 4 to get 8000? Is that 2000 pulses per lead or something?

clort
Автор

I have a spindle encoder but I dont have the acorn board I have the mach 3 boards. Is there a way to wire it in ?

mikemoise
Автор

What was the circuit board you were using? what program is that?

TRC-com
Автор

Can you please help me to make a code for dmx stapper motor with encoder

deeepakkushwah
Автор

How is the expandability of this board? Are there ports for communicating with multiple encoders?

wyleemcandrews
welcome to shbcf.ru