World's FASTEST grblHAL Motion Controller System | E5X MCS T4.1 By Maker Store

Maker Store is excited to introduce the E5X MCS T4.1!

This is Maker Store’s most recommended CNC Controller for all CNC enthusiasts. Whether you are a professional or a hobbyist, E5X MCS is the right choice for your application.

The E5X MCS is an Ethernet-controlled 5-axis Motion Control System compatible with Teensy 4.1 that has been designed in Australia. It is an easy-to-use and powerful CNC motion control system capable of controlling 5-axis CNC machines.

This is the world’s FASTEST grblHAL Motion Controller System


E5X MCS T4.1 provides full 5-Axis plus an independent clone axis control. It can be used for

CNC Machines
Laser Cutters/Engravers
Laser Etching
Robotics
Actuators
Pick and Place Machines and much more

Product Specifications
The E5X MCS T4.1 is the leading edge of the grblHAL controllers featuring a High-Performance 32-bit controller powered by ARM Cortex-M7 processor @ 600 MHz

Microcontroller:
High-Performance 32-bit controller powered by ARM Cortex-M7 processor @ 600 MHz
Multiple interface for plug and play capability
Ethernet support
SD Card support

Outputs:
Full 5 Axis control outputs plus an independent slave axis port
24V Outputs – Spindle, Mist Coolant, Flood Coolant, Dust Extraction
3 x 24V Auxiliary outputs controlled by additional M-codes
External stepper motor driver support for Open loop/Closed Loop Stepper motor
External motor driver support for Servo motors
0-10V or 4-20mA Spindle Control outputs
5V PWM output
Independent stepper motor/servo enable signal for each axis
Rotary Axis output

Inputs:
Closed Loop Stepper Motor/Servo Alarm Inputs
Opto-isolated inputs for DOOR/PROBE/HOLD/START/E-STOP input signals
Opto-isolated inputs for all limit switch input signals (Mechanical and Inductive limit switch compatible)
4x Auxiliary Digital inputs with Schmitt trigger buffer
Protections:
Reverse polarity protection
Short circuit protection

Connectivity:
SD Card
Ethernet
USB
Firmware/Software Compatibility:
Supports grblHAL firmware
Supports ioSender software

Mechanical:
All round pluggable screw terminal connectors for I/O
Dimensions (229x 132 x 32mm)
Easy mounting to extrusion

Stay Connected With Us:

tags: #grblHAL #CNCcontroller #motioncontrol #steppermotors #machineautomation #DIYCNC #3Dprinting #CNCrouter #opensource #CADCAM #digitalfabrication #makerspace #industrialautomation #lasercutting #precisionengineering #hobbycnc #roboticsengineering #automatedmanufacturing #machinevision #mechatronics

[toutoune]

It is fast because teensy is fast. How much is it for the breakout board ?

[Ryxxi_makes]

So do i connect this to a power supply and plug in any stepper motor i want ? was wondering if i can use this on my foxalien 3020cnc

[southernjoes]

Very interested but is there any chance of a wiring diagram for closed loop steppers? Also wiring for a VFD etc.

[JoshKraker]

Loving the board! Could we get a video on how to update the firmware?

[agnaz]

I am from Germany and would have liked to test the controller.
At least it makes a very good and well thought-out impression.

[bushwalker]

Not related to this video, but I wanted to say "Thank You" to the MS team for quick and efficient delivering my order. I ordered some stuff from MS and some other from rm-aluminium. While MS did their job well, the rm failed by sending wrong poor quality stuff.

[makebetterfurniture]

Looks interesting. There are no internal drivers, right?

[scultzalex]

All most 500 💵, is to expensive for a grblhal board !

[maurysf]

😂 got me like this on the x pro v5. Teensy board 4.1 with arm core 7 $50 bob unkit 5axis breakout board $50 with literally everything he just mentioned and probably more to be honest but hey for an extra $200 you get both boards in a nice case 🤦….. and by the way ….. when it finally was time to “drop in” the v5 it didn’t work. Well past the return period (I’m a trucker so it took a while) my machine is up, super rigid, ready to go with no controller, except for this piece of sh…oot my wife’s calling do yourselves a favor and just buy the boards I’m waiting on mine save $200 and still get to go through the headache that you’re gonna have to go through with these people anyways
They do have good extrusions though can’t lie C beam heavy is good stuff