How to Replace GEM Module 1998-2003 Ford Ranger

preview_player
Показать описание

In the video, 1A Auto shows how to remove a defective GEM Module. The video is applicable to the 01 Ford Ranger

🔧 List of tools used:

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Рекомендации по теме
Комментарии
Автор

√ *Watch the Video*
√ *Do it Yourself*
√ *Save Money*

AAuto
Автор

Installed a new one of these in my 99 ranger xlt 4wd today following this video as a guide. Thanks guys!! You saved me about 150 bucks in labor, and about 100 bucks in parts markups!

lbk
Автор

I have a 2000 ford ranger xlt 3.0 the speedometer and wipers quit working. What are the chances it being the gem module ?

timbartlett
Автор

Would a bad GEM module cause battery drainage ?
I’ve replaced battery, alternator, all fuses relays, checked grounds, still getting a voltage parasitic drainage

House_Slynt
Автор

I ordered one of these for my 02 ranger, the exact part number. Do i need to program it?

makodaniel
Автор

Do you have to disconnect the battery before you unplug the gem module?

rickyg
Автор

don't see the part on the website and there is no part number in video desc

LoganTaylor
Автор

Does the GEM Module also affect de 4wd control? Thanks!

marcoazzaro
Автор

Just have a question I have a 1998 ford f150 4.6 Triton 5spd manual. When I pulled my Gem model it only had one plug, plugged into it. But there is 3 plugs to plug into? You ever heard of this?

tobroke
Автор

What all does this Module control? It it in the same location on a 1999 Ranger 2wd? And I have seen it needs to be programed, is that correct??

skooterskoot
Автор

Will that keep power windows and ignition from having power inside of ford Explorer to radio don't power on either all fuses a relys are new

blakebranton
Автор

please, where is the light control unit located? Ford Ranger 2001 eu model

erikozgyin
Автор

I have a 2005 Ford Sport Trac, I don't know where the module is located, could you please help me?

ambientlife
Автор

What would be the symptoms of a bad GEM module?

casta
Автор

What was the problem that lead u to replace the gem ?

wojramos
Автор

did you just take it out and put it back in? I have read it has to be programmed. Even if the numbers match.

Chris-goti
Автор

Before replacing I assume we'd need to test it to be sure that's the problem. Can that be done at a common auto parts store?

bobbaker
Автор

Hi my ford has no light in the dashboard nothing at all how to fix that

kevincarpentry
Автор

i just found out the 96 sable has no Body control module. some show a module by battery but thats for cooling fans and engine. The 96 sable used the GEM instead. its the entire fuse box and on back is a GEM mother board. Discontinued. we are calling salvage yards for exact fit numbers

Jeezuzisreal
Автор

I have 2006 ranger and it doesn't have a module in that location. Where else can it be?

garylake
join shbcf.ru