2001 Ford F250 4x4 gem module headache finally solved!

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

I've been fighting this issue for two years. I saw this video and then ran out to the driveway with a wire tie. IT WORKS! Thank you very much!

mxr
Автор

Connector on the transfer case turns out was my problem also. This video helped. Thanks. 4wheel drive light on the dash wouldn’t light up, turned out to be this. lol

deathkartgaragechannel
Автор

yeah so have the ExACT issue on both my f250s, no negative to relays.. 3 days later and your video, if a zip tie fixes my problem il fly to where you are just to hug you ahaha

Peder-Allan
Автор

super cool
apreciate your mechanics lesson!!!
let do the same si if that is the issue on my truck....

mosflame
Автор

How do you get to you? There are transfer case monitor to switch it back into floral drive or two wheel drive.Show me please

ericreed
Автор

I got no indication lights when I shift the switch. But sometimes when it rains real bad, the four wheel drive low and high lights will flash on and off

ericreed
Автор

I’m dealing with a similar issue. Did the 4x4 light come on before fixing this? How do I check my second relay for ground?

kadenburch
Автор

Do you have a how-to on manually disengaging the transfer case? That's the problem I'm having, it went into 4wd but won't come out.

adamstampley
Автор

Dude I am going to check this! So far, all fuses, relays, and motor are all fine. But I don’t have power to the esof switch. Where does the power to the switch come from? The gem or a fuse? And if the connector was loose at the motor, could this cause there to be no power to the switch?

jhankerson
Автор

Can’t get my 4 low to engaged. Changed everything! 4 high works great. Any ideas?

shannon
Автор

Is it the same as a2002 ford excursion with a 7.3

ericreed
Автор

Did you leave the used gem module in it ? and didnt you have to reprogram the used one for your vehicle?

brianblithe