Fiesta Mk7 subframe bush removal & replacement

*IMPORTANT* You'll see me initially install the bushes slightly rotated to how the originals went in. Don't leave them like that, put them in the same orientation as the old ones (use a marker pen or something). The voids need to be at the same angle as the suspension is built around that.

How to replace Fiesta rear subframe bushes, and the subframe bush tool to remove / reinstall.

Please - see other videos on this channel: cambelt changes, race prep and more...

[billwilson]

I have that exact push pull set. Be sure to use the largest biggest diameter bolt screw in the kit.

[uwhank]

Did the old brushings squack when going over speed bumps?

[aaronnorrie]

Class, I cleaned up the bush housing with some sand paper and brake cleaner then use rubber care for lube and it slipped in also the bolts gave them a wee clean an copper grease the threads so next time they wont be seized solid 😎.

[JosiahCarron]

Really helpful video thanks, going to attempt this later this week. Are the nuts 24mm for the Mekanik set?

[JakeDmk]

What is that tool set called and where could i buy one?

[rickyhicks]

Brilliant video have you got a link for the tool

[Toby_the_Glen]

Great video. Just out of interest can you just 'chisel' out the old bush and replace with a poly bush. Get away without buying tool