Jack Safety: How To Jack Up A Car Or Truck The Right Way

preview_player
Показать описание


How to properly jack up a car or truck to work on it safely.
Рекомендации по теме
Комментарии
Автор

I’ve always worked on my own cars..& now my van..& it’s something that’s always made me think! Only takes once to drop off and that’s it! Great video.

karlossmith
Автор

Remember to insert the safety pins on the jack stands if equipped.

mtdogluvr
Автор

Very nice ... where the rear wheels BOTH chocked? ... that's also kinda important if you don't want to die

woxie
Автор

By far the best and clearest video I have seen on this subject!!!

tdeancline
Автор

Once you have the front of the vehicle jacked up and secured with jack stands, how easy or difficult is it too jack up the rear of the vehicle for having to rotate all the tires for example?

cretivity
Автор

@2:05 the jackstands would walk? can you explain this?

JThought
Автор

"We took a step back". Great advice.

drumzRfun
Автор

On my 08 Ford Ranger I was told there are no solid parts on the frame to put the jack points. So if I jack up the front via the cross-member, can I then put the two jacks slightly to each side of the cross-member?

mckricks
Автор

What about the control arm. Can you jack by the control arm? My little jack is to short for my truck

ApartmentA
Автор

You forgot to chock your rear wheels in your video. It's part of safely jacking up your vehicle. Never rely on your transmission in park use the parking brake. You should delete this video and make a proper video on how to jack up a vehicle safely using the pins in a jack stand if available and chocking wheels.

thedetective
Автор

Was the jack u used a 2, 2 1/2, or 3 ton?

sergiogarcia
Автор

Great Video, number one priority when workng on car. I always worry about safety. Thank you for this video🤗

kota
Автор

I have a 2003 Dodge Caravan and i want to know how to properly and safely jack up this van, I don’t have the owners manual or service manual. Are you able to help?

angeloyourreflection
Автор

I see MT DOG and others caught the same thing I did on the locking point for the jack stand. Good vid tho.

losmoore
Автор

I just set a few retaining wall bricks under my vehicles once jacked up. Way safer imo.

WheresWaldo
Автор

shouldnt you rock the vehicle when youre not underneath it? Imagine if you rock it and it slips.

yaccfonoti
Автор

I have a Ford F-250 ext cab 2x2 truck. I was using a 3 ton from harbor fright but I can not get it high enough . The 3 ton jack stand are not high enough. What can I do?

Jeffreykum
Автор

And those Jack's were recalled lol

mattp
Автор

Shows us how to do it in an emergency road side situation

InsanelyGhostly
Автор

That is not a cross member, that is the chassis of the truck

edgarvasquez