another stick drift fix

If your joystick favouring one direction - it's likely you have the dreaded stick drift on your controller. This can be a pain in games such as Fortnite and Apex. Try this simple idea to fix it!

Follow me on twitter to stay in touch! ✌

Please subscribe if you find my videos helpful!

✅ MORE VIDEOS:
🎮 How to Open Your Xbox Controller
🕹 Fix Controller Stick Drift
🎙What is Xbox Mic Monitoring?
🛠 Popular Xbox Cleaning and Repair

❤ Donations link

Check out these goodies!

Grow on YouTube 🚀

🛠 Torx Screwdrivers are available here:
🚀 BUY THE ROCKET SHIP TOOL HERE
💨 BUY COMPRESSED AIR CANS HERE
🔧 BUY FLAT METAL SPUDGER HERE

#shorts #tinkermanmick #xboxone #xboxseriesx

[silentscope]

New Fix stick drift. Everyone meet up at Microsoft and dump all the controllers at the front door.

[nicolewolcott]

I've now fixed 5 of my remotes that were in my storage. Thank you SO much

[RadL]

It worked ! Just take in consideration :
Up, down => change the right one.
Right, left => change the down one.

[draon]

The washer (moving piece in the middle) can wear out, and the hub (the black piece inside the casing) can get scratched up from the wear and tear. If you do not see any scratches then you don't need to remove the hub.
If you aren't careful and bend the springs on the washer, it might make the drifting worse with calibration malfunctions.

[MT_Real_]

I repaired this way a lot of controllers.

[whatsthewurd]

This works. Bought a used series s super cheap. Controller had the drift. This worked perfectly. Thank you.

[nighthawkviper]

These manufacturers need a class action lawsuit for these because EVERY SINGLE dang Xbox Controller I've bought (Elite Series II, Power A, Base Wireless Series X Controller, and Walmart Wireless Series X Controllers)all get stick drift. I work out and have strong hands but I baby my controllers and after 2-3months; Bam another one.

[theinfamousoogabooga]

This is better than the last stick drift fix video

[Mrnerd]

That green thingy is called a potentiometer

[greenaum]

Have you tried the usual solution for fixing potentiometers, like volume controls on music players, etc? Get a can of contact cleaner, and squirt a little bit onto the track of the potentiometer. Then turn it back and forth a load of times. Often fixes it unless the thing's really worn away to nothing. But usually it's just dirt and skin oil.

[baptiste]

Worked for me !! I just switched both of those things in the other module and it work, thx you ! ( It work for Astro C40 )

[thisguy]

So what I've been doing is sometimes its the analog stick itself that is causing the drift... I'll leave the 2 green potentiometers in and replace the stick... It requires soldering 4 mounts and 4 smaller pins for the R3 or L3 button... BUT since you aren't necessarily messing with the potentiometers, you have a much better chance of being dang close to zero when reinstalling the controller.

[MaZPlaYZ]

I just fixed my stick drift by doing this.. Thank U sooo much!!❤️❤️

[whitewolf]

I didn’t order the exact ones but it worked. The only problem I had was putting them in because there so small but otherwise great fix!

[djisydneyaustralia]

You can also saturate it with isopropyl alcohol, and then regrease with a dielectric grease.

[michaelmiguelicutti]

Where's the link to the part you said would be in the description? Need to know what to get.

[scrambles]

I can confirm this piece is the issue. My dualsense had what seems to be the standard left stick left drift and i fixed it by removing the piece and wiping it off with a dry q tip and reinserting original pieces and had absolutely zero pull now.

[JacksonMiller-ud]

This is my favorite fix. I just took the old one from my other controller and its good as new. I tried cleaning it out like 10 times and it didnt work, as soon as i put the other piece it and back together it was perfect. Deadzone back to 0

[王跃恒]

I saw lots of bend-and-wipe-with-cotton, and lots of de-solder-and-replace. This is the first bend-and-replace. It seems the carbon stripe need some cleanup too.

[parranoic]

I think its actually the graphite pad (green part) that gets destroyed by the metal rubbing on it. you can temporarily fix it by cleaning it.