Changing Out a Power Steering Gear Box

Changing Out a Power Steering Gear Box

• Inspect the power steering system and the suspension system
• Check belts and hoses for cracks, leaks, or oil contamination, and consider replacing them if they are 5 years or older
• Compare the new product to the old product
• Flush the system with recommended fluid type
• Always install a new remote reservoir, if applicable
• Always re-assemble using factory torque specs
• Vacuum bleed the system every time a line is open

LIKE and SUBSCRIBE for more PWR videos

[taylordaniels]

This shows me i need to take mine to a mechanic 😂

[baribob]

01-2022 be advised that Ford used two type pressure hose ends for this period of vehicles. One used 'o' rings the other uses reverse flare tubing. Because some previous purchasers did not verify the reverse flare in the reman gear box someone tried to insert the square off tubing with "O" ring into the high pressure port and destroyed the internal reverse flare male brass fitting. Now Autozone has two damaged units that must return, and I had to find another supplier for the proper unit. My van is a 1992 ford e350 cutaway rv. I am now on my way to CarQuest/Advance parts to pick up another replacement unit and hoping it will not have damaged input pressure ports. Good Luck.

[adventureteamdml]

This is one of the best videos I have seen on this subject. Thanks!

[prestoncoddington]

As much as I love this videos informative guide, My wallet hurts seeing this having realized what I need to do to fix my current leaking steering box. Mechanic:$$$-$$$$. Myself: a weekend full of bad words and still $$$ in parts.

[tronomatry]

Magic!!! I love it! Funny how there is no detail to actually explaining how difficult reconnecting the steering coupler to the gear box steering gear. C'mon son....

[enigmaticnomadics]

not exactly how my t444e is set up but very well done indeed.

[dexburwell]

Best clear and simple instructions (video) on power steering gear replacement ever ! ✅1️⃣0️⃣0️⃣⬆️

[juanmaldonado]

WAW. A. SUPER AWESOME. CLASS. TNKS. BLESSED BE SIR

[howardhughes]

This is a very nice video, but you skip the steps where you reattach the gear box to the steering axle. I have a current issue after replacing my gear box where the steering wheel in the cabin is at a 90 degrees instead of straight. I think I need to adjust that linkage. what do you think?

[R.Ram]

How did you come up with the 1 and 5/8 inch turn?

[danieltol]

Would this be the same on a 97’ GM k3500 with the 6.5L? I purchased a replacement rebuilt gearbox and curious if the rotations are going to be the same .

[rokitman]

Skip YT ads go to the end of any video then restart ❤❤❤

[johncarlos]

Do you need to vaccum bleed? I see most people dont.

[GeraldPoindexter]

Looking for a 1997 1500 Dodge ram 2 wheel drive steering box and the price

[whoisryan]

I did my pitman arm only. And now my wheel is 180° off (upsidedown) no I didn't move or spin the wheel out of orientation while doing pitman removal or install. Any ideas as to why? Literally pulled old part and installed new. 94 Dodge Dakota 4x4