Differences between the Ford 7.3 IDI and 7.3 Powerstroke

preview_player
Показать описание
Naming off just a few of the main differences between the 7.3 IDI and 7.3 Powerstroke motor.. aside from the obvious, being that the IDI stands for in-direct injection while the PSD (powerstroke) is direct injection. How many other differences can you name?
Рекомендации по теме
Комментарии
Автор

It’s enhanced because the idi blocks were just 6.9 blocks bored out so the cylinder wall got very thin

killiantillman
Автор

Blank screen and just audio and it would still be by far the most attractive thing on the internet.

thatrandomdad
Автор

My 7.3 IDI always started every time. It just takes about 3 minutes of constant cranking

DumbCarGuy
Автор

The biggest difference is the IDI is indirect injection vs direct injection for the powerstroke.

aaronmoser
Автор

Idis are more fuel efficient. 21 to 1 compression. You are limited in the amount of boost they can handle because of that though.

martyk
Автор

Well you give me hope for the country I love USA.

JCar-pg
Автор

0:49 lol that made me laugh for some reason great vid

damienboss
Автор

There's not much better then a hottie and a big truck 😊

patriotoutlaw
Автор

I dont need it, however my wife is excellent at giving it unconditionally.

tankerboysabot
Автор

You could have an ATS or Garrett turbo installed and retain factory warranty back in the day

mikemckain
Автор

Idi means indirect injection the fuel is injected into a pre combustion chamber in the cylinder head where a powerstroke is direct injected so the tip of the injector or the nozzle tip is poking out into through the head a little bit and the fuel is injected directly into the cylinder that is the biggest difference between the two

Fl-diesel-Mechanic
Автор

Only thing they truly share are the lifters . And bellhousing bolt pattern . Everything else will not fit in psd in its factory configuration

bigvern
Автор

Pappaw has a 7.3 with a turbo. It’s a 1998? 99? Ford F250

SiWardsRedneckAdventures
Автор

Have a 99 7.3 and it’s alright I guess but the problem is you start getting more power out of your 7.3 and the egts will go threw the roof when towing broke a piston in half because I got it to hot but I still made it back home with out a tow truck and that is y I keep my old 7.3 o and I was pulling 10.000 pounds

braddurham
Автор

Throw a Cummins with a p-pump in there for the ultimate truck. Well done.

cheeseymccheese
Автор

You should do some long videos working on the truck with tutorials.

Wilsonwillfixit
Автор

Nice video and sweet truck!! Love diesels 👍👍

PatrickHennelly-ucmz
Автор

7.3 idi was added turbocharger in 1994 for only one year

andrewbrown
Автор

Turbocharged 7.3 idi did come factory with Garrett ar82 turbo

montgomerypoulos
Автор

I thought the safe limit was 1, 250 & that pistons started meltin at 1, 500... I've seen 1, 260 1 time when mine was an auto climbin a hill, I've heard u don't wanna maintain much over 1, 100. Tho since the manual trans swap in my 92 idi i haven't let it get passed 1, 110 when climbin grades & i haven't seen it get much passed that either

Theidigarage