TOUCH UP paint Factory-Repair deep scretch

Become a member of the community and donate to the channel.
Thanks everyone!!!
#detailing #how #howto

The video shows the TOUCH-UP technique and the repair of car damage.
Factory car paint and UV coating were used.
It was sanded with KOVAX dry sanding papers.
To order on these links:

[MrStimar]

You are using the factory base coat, but is there a problem with the clear from this kit ? Why not using it?

[מדינט]

When I sand alpine white 300, I get brighter white on the touchup and more yellow tint on area around it.

[Soviso]

Hi, sorry, can I use the clear coat that I find in the BMW kit and mix it in the final coat as in the video instead of the UV Coating? Do only the drying times change?

[victorma]

Could you tell me how to use Clearcoat and which step to use it ?

[gbmwp]

If we will instead of the UV and use the Factiry Coating is a problem? I didn't find a UV Coating.

[jonthomson]

I have an older 2016 X1 mineral white that had a few scratches so I bought the touch up paint and it wasn't even close in color. Is there a way to alter the paint to match? The car is in great shape but the scratch repair looks terrible because of the color difference
The touch up paint from BMW is so much whiter than the aged paint on the vehicle.
So much headaches for such a simple job

[RemcoBerg-nq]

Is it also possible to mix clear coat with a metallic paint?

[lrnzrm]

exceptional paint retouching as usual you are very good. one thing that I hate aesthetically is the sign of the heat that the lights in this case the LED lasers leave on the plastic. practically despite the car is brand new the headlight even if shiny it looks old ..

[williamj]

Can you do a video on how to fix someone else’s bad touch up paint job on a scratch?

[fps]

No place here in the us that I can find the paint and clear coat in different containers.

[I_S_S_A_]

Is this regular touch-up paint? Or “BMW’s Touch Up Paint 𝐒𝐓𝐈𝐂𝐊”. I have no idea what this Paint 𝐒𝐓𝐈𝐂𝐊” is & can’t find any type of visual on it online to let me know what I’m going to be working with & what I should be expecting. For example, there is a certain type of touch-up paint applicator I want to use but from the sounds of this “Touchup Paint 𝐒𝐓𝐈𝐂𝐊” by BMW it doesn’t seem like I’m going to be able to use that applicator because it works with a liquid type of paint, it’s only going to work with a fluid paint & this “Touchup Paint 𝐒𝐓𝐈𝐂𝐊” BMWs has does not at all sound like it has anything to do with a fluid, in fact, it sounds like glue 𝐒𝐓𝐈𝐂𝐊 or something similar to that, as if I’m going to have to roll this paint on or something I don’t even know what to think at this point. If anyone has any information on this subject please reach out and help me with this issue I’m having I’d appreciate it very much thank you so much in advance.

[Kreasearch]

Would you be able to mention what music you used? Great job as always, thanks.

[cristiankovacs]

Profiiii like all the time 💯! Best Regards!!!

[kelvin]

Great Job!
This is possible with paint BMW A96?

[Minkyu]

8:31 I still see some small chips and the surface is levelled enough. Did you have to use the UV coating again before polishing?

[Mr.johansson]

Awesome work my brother 🤩💪your the master 💥💯

[theMoss-ns]

Pozz, imam jedan problem, stavim baznu boju, 2-3 sloja, nakon toga hocu izbrusit i poravnat, medutim sva baza prakticki otpadne, zasto ? Ispolirao prvo i sve kao ti, ali ne funkcionira... Kako da to odradim onda ? Radi se o boji LZ7G.. Lp

[nnuoo]

where are you guys located? and how much does this kind of repair cost? thank you

[chichyiphone]

How much time it took you for the touch up? How about touching up rock ships like in the hood or rocker panel ? Thank you

[prika]

Sjajno odradjeno...nema razredjivanja niti baze niti uv bezbojnog?