PRO Quick Connection of Generator Probes and Accessories

Attaching the PRO Quick Connect Generator to the Homogenizer Motor Unit:
1) All generators are fitted to the motor unit by inserting the upper end of the generator into the collar end of the motor.
2) Align the vertical slots in the generator with the locating pins in the motor collar by rotating the generator.
3) Once aligned, push the generator inward as far as possible and turn the generator left. The collar is spring loaded so you will feel some resistance as you push the generator inward and turn it.
**CAUTION**
AT NO POINT SHOULD EXCESSIVE FORCE BE NECESSARY TO CONNECT THE GENERATOR TO MOTOR UNIT
4) Once you have turned the generator ¼ turn, release the generator and you will hear a distinct click which is the generator dropping into its locked position.
5) To prevent the generator from disengaging while being used, insert the safety clip between the upper collar of the generator and the bottom of the motor collar.
6) To disconnect the generator from the motor unit, remove the safety clip, push the generator up into the motor collar as far as possible and turn the generator clockwise ¼ turn. The generator will be pushed out of the motor collar by the force of the internal spring.
**CAUTION**
DO NOT REMOVE THE MOTOR COLLAR FROM THE MOTOR UNIT.