FORD EDGE VALVE COVER GASKET REPLACEMENT 3.5 LINCOLN MKX FORD FLEX

FORD EDGE VALVE COVER GASKET REPLACEMENT 3.5 LINCOLN MKX FORD FLEX
In this video we will show you how to replace the valve cover gasket or how to remove valve covers on Ford Edge first generation 2007-2014. It should also work on Lincoln MKX since they share the same platform. We demonstrated how to remove and replace the valve cover gasket on 2009 Ford Edge with the 3.5 engine.
This video might be helpful on:
2007 Ford Edge Flex Valve Cover Gasket Replacement 3.5 3.7 V6
2008 Ford Edge Flex Valve Cover Gasket Replacement 3.5 3.7 V6
2009 Ford Edge Flex Valve Cover Gasket Replacement 3.5 3.7 V6
2010 Ford Edge Flex Valve Cover Gasket Replacement 3.5 3.7 V6
2011 Ford Edge Flex Valve Cover Gasket Replacement 3.5 3.7 V6
2012 Ford Edge Flex Valve Cover Gasket Replacement 3.5 3.7 V6
2013 Ford Edge Flex Valve Cover Gasket Replacement 3.5 3.7 V6
2014 Ford Edge Flex Valve Cover Gasket Replacement 3.5 3.7 V6

2007 Lincoln MKX Valve Cover Gasket Replacement 3.5 3.7 V6
2008 Lincoln MKX Valve Cover Gasket Replacement 3.5 3.7 V6
2009 Lincoln MKX Valve Cover Gasket Replacement 3.5 3.7 V6
2010 Lincoln MKX Valve Cover Gasket Replacement 3.5 3.7 V6
2011 Lincoln MKX Valve Cover Gasket Replacement 3.5 3.7 V6
2012 Lincoln MKX Valve Cover Gasket Replacement 3.5 3.7 V6
2013 Lincoln MKX Valve Cover Gasket Replacement 3.5 3.7 V6
2014 Lincoln MKX Valve Cover Gasket Replacement 3.5 3.7 V6

Products used in the video:

Our Most Popular Videos:

♦♦♦ Cameras & Gear Used For This Video ♦♦♦

•Cameras

•Tripod

•Microphone

•Light

•Comuter for editting

♦♦♦ Other Equipment and Gear that I use ♦♦♦

•Camera

•Extra Computer For Editting

► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!

This is not a sponsored video. Everything is purchased by us!

The video is meant for entertainment purposes only. Do not Attempt!

AMAZON ASSOCIATES DISCLOSURE

*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

[AutoRepairGuys]

⛐ Check out our Garage to see what tools we use and recommend:

[lincolngriffith]

Thanks for this video. I had to do this myself on a 2007 Mazda CX9. The heads up on all the bolts and connections on the backside were very helpful. Wish it was as easy a job as it appeared in your video. Took me about 5 hours total with lots of cussing, cramping and almost a divorce. What a bastard of a job! Would suggest you replace Spark plugs and the ignition coils while you are in there. You will never want to do this again so best to do this while you can.

[NateOffGrid]

Thanks for the vid guys. We have a 2007 Lincoln MKX for my wife, let me tell u, if it wasn't for you guys, I would have thrown a match down the gas tank long ago! I hate this car, but it's cheaper to repair it than having another car payment.

[joshuacortez]

Nice video, guys! I'm about to replace my valve cover gasket and I need the torque spec and pattern.

[Ze_Matts]

Your videos have saved me time and time again! Thank you!!

[Codyjrt]

Nicely done. Need to to the same job soon.
Are you Bulgarian? You have the same accent as my Bulgarian wife.

[paulfoldes]

would you do a video how to remove oil pan on ford edge I have 2010 edge fwd thanks

[sliceoflife]

Do you guys know why your Bank #1 (rear) valve cover is darker than the front? Mine is exactly the same at 120, 000 mi.

[qwilliamson]

No need to remove throttle body if just going for valve cover gasket...

[jorgefranco]

How much oil pressure should you have at idle?

[williamgrissom]

TORQUE 89 in/lbs, or 10 NM. sorry for the spoiler, I could not find it on your youtube page or by simple googling. Also, the spark plug seal is a PAIN, without the proper $188 tool that is. I was able to hammer it in with soap water and an 1-1/4" socket (deciding the others were not in bad enough shape to bother with.) Also went ahead and replaced the PCV valve while that part was opened up

[Thebunholio]

Why don't you guys ever show reinstalling

[WhatEverHD]

I have a bracket holding down the rear valve cover holding up the AC line by the firewall. I can't remove it. I tried 8mm socket and it's too big. 7mm is too small. Gonna try standard long sockets.

[miguelangelcervantescervan]

Excuse me, I changed the spark plugs to mine and started to pour oil there, I would like to know the reason please

[williamperez]

Anyone know the valve cover torque specs?

[GamerNxUSN]

Are those aluminum valve covers? All the ones I have seen are polymer

[TheBalognaPony]

Changed spark plugs and both valve cover gaskets started gushing oil. Anyone else experience this? 2010 ford flex 3.5

[SmittySpeaks]

I think I will just let the shop handle this one....

[mateodiesel]

Any body have a sec to answer a question

[partytimexxx]

Really didn't need to take off the throttle body. Just disconnect the hoses and clip. Use an extention and a swivel to get to the bracket underneath. 🤷‍♂️