DIY Furniture: Modern Outdoor Bench | Infinite Builds

A simple and easy to build outdoor bench made out of 2x4s and 1x4s. Minimal tools required and very beginner-friendly!

Cut List:
• 2" x 4" x 70" - 7pcs
• 2" x 4" x 14 1/2" - 14pcs
• 1" x 4" x 18" - 12pcs

Materials List:
• #8 x 2" exterior wood screws
• Wood glue

If you like the video, don't forget to like and subscribe! It will help my channel out alot! Thank you for watching! :)

[southbridgeforestHOA]

thank you. I am going to stain all the pieces two tones a red cedar and a dark black and then assemble it for a 2 tone finished bench!

[kaiaevert]

I can't wait to make this. So simple and very nice looking. Luckily for those of us with just a drill, all of the pieces can be gotten from from HD or Lowes pre-cut and treated....am still going to paint mine blue and white with outdoor weather resistant paint I used for another project last summer. Thanks!

[Will-dtyg]

Thank you for sharing this very nice bench, I was looking for some furniture for our new porch. THis is a beautiful design. Thank you for the video. Nicely done on the video and the bench.

[robschultz]

Nice design. I might use this for a poolside bench...countersinking is nice but unnecessary here unless you are close to the end and afraid of splitting. You can just drive the screw and if it wants to gap out just reverse and resink. Also if you dont want to buy a countersink or switch to a drill bit you can spin your screw backwards until you make your hole, effectively turning your screw into a pre drill. We use this trick alot when pre drilling is helpful but not always necessary.

[Harry-jjqw]

Love it! Exactly what I need, simple, solid, beautiful and looks modern

[chrisp]

Looks great bro and gives me some ideas! Thanks

[armorvestrus]

I love the pattern you used on this it was amazing how you did it.❤❤❤

[aldo_domingo_]

Thanks for the video. It seems easy to do it. I will try and give you the results

[shpetimbeshiri]

Looks very Good 😊
I need to try this but for I guy who lives in Europe I don't understand the dimensions in the description :/

[mauricecohen]

Great job. I would removed the rounded edges at the table saw so it is not so obvious that it is made from 2x4's .

[Being_Joe]

Nice bench. Any reason you did not use wood glue all around?

[NicoleHough]

I love it! Could you please list the finished dimensions of the bench? Thank you!

[kimtran]

Could you give me the cut dimension for the wood and what type of screws to use, this is my first wood project.

[ladyjr]

Would like to know what model Drill/Drivers you are using please?

[rosst]

Thanks for the video! Did you use #8 x 2" screws on the 2x4 boards... and they held?

[Zihenroy]

These materials to create bench like this cost around 200 euros in my country...

[analeigh]

Could this be made as a 10ft bench instead? or would you have to add supports in the middle?

[diybuildandlife]

How many pieces of 2x4 are needed and 1x4 are needed?

[JeskaRain]

IDK if the price of wood went through the roof or something but this bench is deceptively expensive to make. Other than pride in the achievement what's the point of DIYing if it ends up costing substantially more than just buying from a store?!