I made an RC flying wing | Joywing 1.1 an improved version

The main difference in this homemade wing from its previous version is the added fuselage, and some reinforcements, also I added a powerful motor to go really fast with 4S batteries.

✦ Download the plans here ✦

【Component list】
Material construction: Foam board, foam core or similar 5mm.
Radios.
▬▬▬▬▬▬▬▬▬▬
Receivers for FrSky:

Mini receivers for Flysky:

Receivers for DMS2 (Spectrum)
▬▬▬▬▬▬▬▬▬▬
Motors:
Other options:
▬▬▬▬▬▬▬▬▬▬
Propellers:
▬▬▬▬▬▬▬▬▬▬
ESC's:
▬▬▬▬▬▬▬▬▬▬
Servos:
Servos I used:
▬▬▬▬▬▬▬▬▬▬
Bateries:
Buy them from your local store since some restrictions can apply in shipping.
For 2S and 3S use from 400 to 850 mAh.
▬▬▬▬▬▬▬▬▬▬
Connectors (depending on the battery you use):

▬▬▬▬▬▬▬▬▬▬

Subscribe:

Instagram

List of equipment I use
Cameras
Sound
Lighting
Accessories

#JoyplanesRC #RCHobby #Joywing

[jumpstartfpv]

It's just amazing how you give the plans for download so that anyone can make the same.

And your manual launch is fantastic. Looks like an autopilot at work.

[amszulu]

I plan on doing this myself. Cheers mate. My grandfather was from the North.

[shreeyashsalpe]

heyyy i want to make a bigger fuselage can i extend it horizontally ?? plz reply

[LaLaObeRoT]

Nice! A lot of effort with the ribbed wing though. These days i cut and glue my flying wings for FPV with flat 6mm foam plates (depron) using KFM-2 or KFM-4 airfoils and cover them in tape. Builds really fast, flies nice and the planes are really, really, really robust.

[emmanuelquinones]

I would like to make one great job that thing rips the sky keep it up you’re onto something

[roo]

Can't wait to build this and put FPV on it!

[MaxMustermann-vwbl]

Awesome wing! I think It would have had even more power if you were using a xt 30 instead of a jst connector. I used a jst connector with a 1407 and a 3 inch propeller and the jst connector got very, very hot. So I guess it has a lot of resistance because the motor was pulling only 10-15 amps max.

[RudyFPS]

Good i love, can you juste add the small side wings that are orange in the plans

[softart]

im going to try with today's options ... thank you very much

[johnjuhasz]

i love your videos and your construction methods, great work, thanks

[jaimedelosrios]

CONGRATULATIONS !! You maKe it look soo easy. I see the rain could be slowing you down, but you still have more freedom in Ireland than in the USA. Here the goverment needs you to register everything (any UAV, unmanned aerial vehicle) and there are very few fields like yours where you can fly without being chased away.

[elliptic_echo]

Thanks so much for putting up this design it's so much fun.

[karthikt]

Awesome flying , you inspired me and love from India.

[vinothn]

Hey dude ... Awesome job.. 😎... I need some help about MC6C controller and MC6RE receiver! Pls reply

[Maharja]

Is it possible to scale this up? To maybe a metre or 0.8m wingspan?

[marianofpv]

This is a great wing. What wingspan should I scale it up to use it with 2306 motors and 7 inch prop? I'm planning to use it with inav/vtx/camera/gps.

[hubebruno]

Awesome ! I have printed your plan, lovely little wing for my little turnigy 1811 :-P

[waseemshah]

How do I take sweep distances .. should I measure from fuselage to tipchord .. because fuselage come ahead of wingspan

[christianhernandez]

Excelente tu canal bro... me gusta mucho este modelo de ala, pero mas me gusto el ESC que modificaste... parece un blheli.... tienes descripcion de ello.? muchos saludos. brutal el acervo de planos bro. millón de gracias.

[agnikchoudhury]

Hey, how did you keep the lid in place while flying?