How to Make Super Simple RC Airplane With Handmade RC

Показать описание

I used 3 servos for this model. The model can take off and land from short distances. That's why the nose wheel is fixed. A rudder is also not required on this model. Since there is no rudder, servo cost is reduced. And the flight weight is also slightly reduced. The model is structured as simply as possible. But it has a stable flight. It can also fly at low speeds. It is also suitable for beginners.

If you like my projects and want to support me to make them sustainable...

5mm Kraft Foamboard (2 plate)

If you don't want to use handmade RC:

Some of the shops that sell Kraft Foam Board:

Thanks for watching. If you want to support, join this channel.

Technicial Specifications:
Lenght: 86 cm (33.85 inc)
Wing span: 88 cm (34.64 inc)
Flight weight: About 419gr + battery weight
Center of gravity: 6.9 - 7cm from the front of the wing
Required control system: Min. 3 channels, 3 micro servos
Suitable battery: 11.1V 1300-2200Mah
Suitable motor: 2212 1400KV Brushless Motor
Suitable propeller: 2-Blade 8x4 or 3-blade 7x4
Flight Time: Approximately 10-20 minutes
Vbar: 0,701

Thank you for watching. Please Remember to Share and Subscribe for More Amazing Videos.

#rcairplanes
#modelairplane

Рекомендации по теме

Комментарии

🙂If you like my projects and want to support me to make them sustainable...
Patreon: patreon.com/KNDYP

Kendin-Yap

what a time for a RC hobbyists has the last 15 years been when YouTube has provided a platform to hobbyists share all kind things they do to others...

Mkcal

Thank you for publishing this! I have tried this design. Of course, mine did not work as good as yours but I am making a second try. I suspect I had a faulty wiring, and one of the servos for the ailerons got disconnected. I had a bad crash at a second attempt of flying but it was my fault. Anyhow, it is a fun design and for me, a junior in this hobby, is a great example of how to create something that flies. Best of luck and thank you for the work you publish!

red

I am so fascinated with building aeroplanes, I already build 2 in last 2 weeks (this one is not finished yet). Wish I could share fotos, can’t add them here(. But surely will continue with this hobby!

Thank you so much for filming these videos. I wish I had a teacher like you and a friend like me!

themosquito

Flying remarkably well considering the relatively simple design. Well done.

evertspies

Eu acho que todos que sabem fzr isso ou qualquer outro tipo parecido. É um gênio. Parabéns. Por mostrar o que vc sabe fzr de melhor. Eu sei fzr artesanato e pinturas em tela. Admiro demais quem meche com mecânica e essas coisas kk Parabéns

PedroWin

Congratulations! Really a nice video tutorial

AeroDesignRC

Как же это здорово, когда есть время и место для изготовления и запуска моделей! И самое классное, что чуть ли не за пару часов можно собрать подобные модели!

grey

Very cool! Reminds me a little of the OV-10 Bronco. Greetings from Switzerland.

danielm.

Using the MG90 servos is a great idea. They're only like $1 more than the blue plastic ones and they will last a lot longer and not fail on you.

thebunkreport

Ayrıntılı anlatımınız için çok teşekkürler.

alicaliskan

Very simple aeronautical engineering. I like ur landing too, I was expecting the wheel to come off. Better than BOEING.

ReerMiyi

Vou montar um desse! Projeto muito interessante.

DiversidadeVisual

i love you for this, , true DIY heaven

msha

I love your tutorials. I'm so glad that you wrote in the description all things needed to know. Thank you for yor adventage. I will use your project in a tournament in my school. ❤😅

fanatykfizyki