EASIEST Way To Make a CUSTOM License Plate Mount / TAIL TIDY For a CAFE RACER

A lot of universal license plate Tail Tidy's stick out more than we would like. here is the easiest way to make your own short custom Cafe Racer licence plate mount/tail tidy using some basic tools.
If you have read this description leave me a (thumbs up emoji 👍 in the comments). I will be giving away a Cafe Racer enamel mug to a random person that left me a thumbs up. Shhh 🤫
Id love to know who takes the time to read the descriptions.

#CafeRacerLicensePlate #CustomLicensePlateMount #CafeRacerGarage

💥💥Want to see exclusive content, behind the scenes footage, and get updates on what’s happening on the channel before it happens?
VIP giveaways, merchandise discounts, and much more!
=====================================================
=====================================================

★ DON'T FORGET TO WATCH
=====================================================

★ 01. Honda CB750 Frame Mods, Making Custom Brackets + GARAGE EXTENSION

★ 02. RUBBER MEETS ROAD! ★ & Building the Under Seat Tray with A Key Lock - EP.57

★ 03. Making a Custom CHAIN GUARD That Becomes An IMPRESSIVE FEATURE! Step-by-Step | Ep56

★ 04. Making a CUSTOM Motorcycle SEAT LATCH + [100k subs GIVEAWAY] Ep.55

★ 05. HALLOWEEN GAS BOTTLE PUMPKIN PROJECT TimeLapse | DIY Jack O Lantern

★ 06. WET BLASTING ★ VAPOUR BLASTER - Workshop Upgrades - Sandblasting

=====================================================
★ Goal - 1 Million SUBSCRIBERS
=====================================================
★ LIKE | COMMENT | SHARE | SUBSCRIBE
=====================================================
★ Please Subscribe To Cafe Racer Garage Here:
=====================================================
★ CONNECT WITH ME ON SOCIAL MEDIA
=====================================================
=====================================================
=====================================================
★ ABOUT MY CHANNEL
=====================================================
Hi Folks,
This is Dan, let me show you step by step how I build stuff each week including my CB750 Cafe Racer & the (Honda Scrambler/Tracker build on a budget challenge) SUBSCRIBE to follow my future builds, I'm based in Australia.
=====================================================
バッテリーホルダーとナンバーホルダーの製作 [ASMR]
カフェレーサーガレージ-チャンネル登録してください

[jamespolucha]

Thanks for the video, I was thinking how I was going to mount my tag, didn’t want a side mount, I did the same as you, thanks again, now I needed a tag light but found tag bolts with a led in the bolt head that works perfectly

[Thewatson]

Quick simple little plate holder 👍🏼 great video Dan

[rebuildranch]

Another great little build, thanks for the great ideas!

[neophobiagarage]

35 degee from vertical is the limit in Germany, love your video, have a good transition to 2021

[tonyclausen]

Thanks Dan great video. Have great Christmas break. Cheers.

[Gus-cgyp]

Hi, nice job but is that plate angle legal ? isn't it too flat ? thanks and have a good new year day . Gus

[jasongaretthatcher]

Amazing. What rear tire is that? Also, what brand of piggyback shocks do you have on this build?

[scottdog]

Gotta watch those fans mate !!! Not sure about the angle Dan, might get some nice tickets from the boys & girls in blue. Don't forget a reflector, demerit point and a hundred and something dollar fine for not having one.

[spikestrip]

I did the same to my thumbs but instead of a ceiling fan it was a table saw on one thumb and a Sawzall on the other lol

[zoeybowden]

Hey mate about to start my first project was woundering how do you go about getting these bikers registered and roadworthy

[garyyorke]

Great video as always Dan . Not sure if itll be acceptable at that angle to the local plod in the UK ..probably get pulled over for a chat ...

[catstevens]

Is there any law regarding the angle of a number plate to the ground. Speed trap cameras
couldn’t read a number at such an shallow angle, which could be a good thing but is it legal ?

[garya]

Pretty nice result, Dan. I’m guessing that much of horizontal angle might not be acceptable here in my state of Delaware. Is it ok there? I’ve seen some guys mount the plate sideways coming off the chain guard... which is probably pushing the limit here. BTW, you should be thankful you don’t have to deal with the plates they use in the UK- they’re the same size as the car ones! In any event, wishing you and family a super new year!
🏍👍🏍

[LiveFreeMoto]

very much stuck where to put it on mine at the moment

[JanKousholt]

BTW. Don't you need lighting for the plate in AU?

[ramk]

That plate angle is definitely not right

[tyronegarvey]

That’s not cheap ‘ what if you don’t have those machines and lazer and all that’s things you used in the video then just the process is just ridiculous.. then you realy went off track to using the one bolt “ your making the plate for your special bike. Not every has abundant 750 with that shape the video supine about making a cheap efficient plate holder I thought that’s what the video was about . I ok so the video was for whoever has a bike like yours which thas just stupid

[andrewd]

Nice engineering but no way legal in Victoria.👎🏻