How to Replace Front Wheel Bearings 2004-2009 Audi A4 Quattro

Buy Now!

This video shows you how to install new front wheel bearings from TRQ on your 2004-2009 Audi A4 Quattro. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.

This repair was done on a 2007 Audi A4 Quattro Base 2.0L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2004 Audi A4 Quattro
2005 Audi A4 Quattro
2006 Audi A4 Quattro
2007 Audi A4 Quattro
2008 Audi A4 Quattro
2009 Audi A4 Quattro

Tools you will need:
• 21mm Socket
• M12 Triple Square Driver
• Slide Hammer
• T30 Socket
• A Piece of Pipe (for leverage)
• Copper Anti-Seize
• Safety Glasses
• Hammer
• Plastic Sheet

Check out our playlist:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[TRQ]

√ Watch the Video
√ Do it Yourself
√ Save Money