My Bissell Revolution pet pro is leaking p2

Focus forward Journal:

My Ideas Journal:

Members-only videos

Join this channel

Donate to our channel

PayPal:

Cash app:
$wayne2will

Mail:
Monroe Vacuums And Supplies Inc.
622-J W. Roosevelt BLVD
Monroe, NC 28110

This video will cover a part of the pump that is leaking

To support the channel please visit
Or

[javiervargas]

Thank you very much for your video, the brush stopped working on my vacuum, I had no idea what it was. The belt you pointed at 6:15 had come loose, I put that back on and now it works. Thanks again.

[Theboxersisters]

What do you mean by film on that piece? Couldn’t you just plug that hole of your not using hose attachment?

[Befetti]

Hi Wayne. Could you please do a video of the disassembly of the older model Proheat 2x Revolution (red one) to the point where one can access the main shaft and pump. Excellent channel. Thanks. Andrew

[jimmyherter]

Thanks, I kinda knew this is what I had to replace but didn't know how to get to it. Now if I can just find the part.

[vincentlenci]

Wayne cant find this mornings response from you but want to say thanksvery much! now im in the process of reassembling not only am I a bit blind my brain is blind too! LOL ... but true

[johnnypen]

So the cause of the leak, when using the upholstery tool, is this plastic elbow breaks?

Mine has leaked from the first time I used the tool.
I was thinking maybe i was supposed to have the tray under the machine while using the upholstery tool, but I tried that yesterday, and it just overflows the tray as well.
Appreciate the video.

[chasechrismadison]

What is the name of the part so I can order a replacement?

[spes]

Just had to take mine apart because it was pouring out of the coiled pipe under the unit, after much disassembly, I wrapped both the end of the pipe with PTFE tape and reassembled it and it seems ok

[valeriemoran]

This is so helpful! My bissell proheat 2x revolution pet 1548F won't stand up and lock into place after I had to replace the power cord. I think I missed a crucial step putting it back together. What would you recommend?

[whitneyr]

Just had this issue and returned it and didn't know if I even wanted to get a new one. It's bubbling out the connection where you put the upholstery hose. Tank emptied onto my floor in seconds.

[wolftamer]

I have this model and my issue is the quick shot button went down and now will not come back up. I've gotten it down to the casing and I've looked at the black and white trigger button but I cannot figure out what's going on! It's been weeks I am about to cry I'm so frustrated!

[alandouglas]

Thanks this helped me a lot my button to engage the quick shot went haywire so I just removed the plastic green cover for it now it’s working fine without the green push cover.

[m.tierney]

What is the name of this piece so I can buy it?

The button on the cable to inject the water is loose. Is this part of this problem or another problem?

[drblaxe]

Appreciate your videos. As soon as I attach my clean water tank on the pet pro, within a minute the water will start leaking from the very bottom of the machine from one of the tiny holes, even if the machine is completely off and the trigger is not pressed. Within a few minutes the carpet will completely soak underneath. After opening the machine, I noticed the water is all coming from the pump where the white thing is attached. Not sure if that is normal, if the pump is the culprit, or if it is further upstream. Do you have any specific video for that issue? Had a tough time finding it.

[ryanmanewich]

Mine is leaking through the other side, the part that goes to the floor. Do you have a video on that?

[waterbug]

Hi, subscribed and watch a few videos but can't seem to find what's up with my Bissel Revoltion.. I have the issue as soon as I put the water tank on it just starts dripping out the bottom... like behind the brushes out a few square holes... tilt it back more and it will drip below the square holes and out that round molded area, by the hose, out of them 2 holes.... I suppose I'll just start taking it all apart. Any advice will help, thanks! Good channel!

[Truesoldier]

You are my hero!! this is the exact problem I have.

[patcharles]

How old is this machine? I am desperately looking for one myself. I always uses the other popular brand, but after my last one lasted one Christmas to the next, I no longer wants to take the risk. So I’m leaning towards Bissell.

[Justnice]

Will that part fit for the regular “Pet” your showing this for the pet pro. I called the repair shop and he said that part isn’t made anymore for the “ pet “

[connerhein]

Thanks for making these videos. Is there a way to purchase parts through you?