Stop stringing your guitars like this! #guitar #guitaradvice #guitartech

preview_player
Показать описание

Рекомендации по теме
Комментарии
Автор

The one fret tip is amazing!!! That one piece of info is well worth the 6 hours I spent on YouTube today

grateful
Автор

I was worried he was going to criticize how I restring, but thankfully he recommends exactly what I do. 😂😂

dallasgeralds
Автор

One thing to note: don't wind your lower strings while engaged in the nut until the very end! You want that nut the width it is. Don't make it wider by grinding it down with the string.

mskcrc
Автор

I bought my last guitar from this guy and had him set up two others. Super cool dude and my guitars play so much better now. Shout out to Ben at Big House

mattvillarrubia
Автор

I restring my guitars myself, so he’ll never have to worry about facing my knots!

Napalmdog
Автор

This was the exact channel from where I learnt the knot thing and now this is the exact channel that is making me unlearn it. 💀💀

AnujPoudel
Автор

strung a few strings in my time, always struggled to get the perfect amount of slack on the string before I start winding it. That trick of pulling it to the first fret is genius.

scottcallaghan
Автор

I've been restringing my guitars for 20+ years. This tiny tip is what I've needed all this time...

"Pull it tight, bring it back one fret, bend it off."

For 20 years, I haven't found a better way to judge the excess string needed for the post winds than to just measure it against my old strings and do my best to compensate for the stretch.

This is one of those tips where you think you should feel silly for not thinking of it but you're just so damn happy to have a good solution that any embarrassment is vaporized.

Thank you so fucking much.

feezer
Автор

I usually just go out and get a brand new guitar every time an old one needs new strings

TheOnlyDanielLewis
Автор

I do one wrap above then the rest below. Its better way to keep the strings in tune because when you transition to the wraps below it locks it in with mechanical force of the string pressure.

LuminaryCursorem
Автор

And this is why I like locking tuners. Just yank, tighten, turn, and you’re done.

martianmurray
Автор

I do one over and the rest under. No knot.
The pinch keeps it from slipping.

gregdenson
Автор

Been just doing a simple bend on the string for decades and it works fine. I would never bother with a complicated “knot”.

Skoora
Автор

As someone who sells guitars, and restrings/fixes them from time to time. I can say 100% that I absolutely agree with everything this man said.

TheOfficialAftershock
Автор

What he says not to do was actually in the Martin manual when I got my Custom Shop.

ZacCostilla
Автор

I do the pinch method. One over and the rest under. If it’s a 3x3 headstock, for the G string I do the opposite. One under and the rest over, so the wraps wind going up the tuning peg. That’s to prevent the Gibson G string tuning issue. That way it doesn’t have such a steep break angle, and the G will stay in tune.

Dan.Solo.Chicago
Автор

When I was gigging 5 nights a week our tech used to do the knot, I didn’t like it if I broke a string practicing at home. I’ve always strung like this guy.

saucyjk
Автор

I do mine exactly the same! Cleanes up super nice after cutting the ends end too.

MECHcify
Автор

Do not push the string down against the head of the guitar while winding unless you do not mind friction damage from the string on the head.

pandytbox
Автор

This is how you string guitars when you have 700 guitars to string.

jasonconcept