Epoxy Resin Tips and Tricks! | How To Use Epoxy With Wood!

I wanted to share some tips with you guys about using epoxy in woodworking. Hope you find some value in here!

[WalkersWoodworks]

Be sure to check out my website for other Projects, Blog posts, Plans and Tools I use! Walkersww.com

[aaronsears]

Love the SF Giants making a home in your shop!

[diyhuntress]

Super helpful, my dude! Love MAS as well!

[bentswoodworking]

Very informative video. I feel like it would answer just about any questions people could have.

[Bucketlessheadroc]

One application you didnt mention is inlays. I did a project in HS where I finished off a tabletop by routing out a design and filling it with epoxy I had colored by just spraying spraypaint into the mixture while pouring. Did it before sanding and it is still pretty badass 16 years later.

[conorenglefield]

What make are your red squares behind you ? Where can I get them in the uk ?

[christiansapp]

Great information! Thank you for sharing all your knowledge.

[TheCentralflorida]

Art resin or craft resin? Is that a bad idea for a small river style shelf? Does it lack adhesion properties?

[robm]

I’m gonna do a blue river table, but once it’s cured I want to do a table top flood coat on top. What’s the best way to scuff up the river epoxy for good adhesion, but also have the colored river still look great? Thanks!

[ronmtpleasant]

Is there any way to salvage an overheated pour? It's hard for the most part but tacky.

[michaelzellers]

I followed all the directions on the instruction sheet and poured my epoxy on a live edge bartop. I used a heat gun to raise the bubbles that formed and one end of the top turned out perfect. The other end began to get foamy bubbles in it and at first I could get most of them out. Once the epoxy began to set I had to stop using the heat gun because I was beginning to see ripples forming. the epoxy however continued to foam and I am afraid they are going to be in the coating. What made one end so much different than the other? Is there anything I can do to fix the problem?

[austinsheehy]

Hello! Great information in the video. A couple questions. First, I did a seal coat and 2 flood coats to my table with no air bubbles at all. Followed all directions to a T. Checked on it constantly with no air bubbles. 2 days into curing i went out to check on it and it had air bubbles (AARRRGH!!) Any idea why that happened? Second question, did you use table top epoxy for the coasters? Thanks!

[brunomelo]

thanks for the video! but I have a question about epoxy! Sometimes, after removing the table tops from the base, the wood is warped (cup). Why does this occur?

[stephaniemcmullen]

What is the website I can order epoxy from? I made a small frame of bottle caps and a small table with bottle caps. Now, I need an epoxy to put on top.

[mrpaint]

I live in Queen Creek Arizona, sounds like I might have two or three days per year I might be able to pour epoxy. It’s 106 F right now. But great information thanks.

[jawhsome]

this has had so much helpful info! god i wish i had stumbled upon this earlier. anyways thank you very much and keep up the great work!

[fleetswoodshop]

GREAT VIDEO. THANK FOR THE TIPS FROM DOUG

[julbobn]

Is the a current discount code for MAS?

[davidpluister]

Cool stuff! Is there a new discount code for MAS? Thanks for the info!