Loncin 200 Engine Full Restoration

Loncin 200 Engine Full Restoration
#engine #restoration

[eduardodaquiljr]

Others use crankcase splitter but in your work you split case like butter!amazing dear.

[namtech]

Good job, these engines are pretty simplistic, and they work great and last forever if you look after the. But am I the only one that noticed the piston is the wrong way around? IN should face towards the intake manifold not exhaust?

[mitchlec]

Good Work! When you pulled the head off, do you remember if both head bolts on the clutch side had washers?
Thank you

[mdacosta]

have you ever have a intake valve that when setting valve lash will always be tight and will give you 0 air valve lash and i believe that its due to a receding valve and by replacing it the valve will fix the problem

[EvgenyTrush]

Наконец то сделал подобие мастерской. Картинка стала более приятной

[DeargMcCumhailMuhBeaches]

Have you tried one of the big bore kits and a performance cam with stiffer cams for these engines? I have the 197cc version in a TaoTao ATV my nephew wrecked.

As a hobby, I build Vintage Board tracker replicas, ride them a while then sell them. I usually use used Honda clone industrial engines I can get my hands on cheap, for example harbor freight predator 212's up to the 670 v-twins, mated to a stall converter set up like used on go carts.

I have wanted to build myself a shifter with a clutch and put some 325-350 wide front tires and 400-500 rear 26"-28" Coker, Dunlop, or Firestone motorcycle tires to register for highway use and keep.

Seeing as I have the 197cc 4 speed with reverse, I thought maybe I'd try and get as much power as possible. I already did the 30mm re-jetted carb with a 12v low pressure in line fuel pump, and port matched the intake and ported and polished the exhaust port for extra performance. The carb has a velocity stack, and it has a custom welded exhaust header..

[eduardodaquiljr]

the push rods must be labeled intake or exhaust so when assembling again they will not be interchanged dear.

[fidoepic]

No limpiarse el filtro centrífuga de aceite hasta ahí todo bien y Si le echas desgarrador quedan las tapas como nuevas le quería todo lo negro pegado también debiste cambiar los discos de clunch y la bomba de aceite

[TheKapdemelo]

Hi and really nice video! I'm thinking on getting an atv with that 200cc engine for roughly 250bucks, and this content is great for studing it since its impossible to fins any documents! Looks like the flywheel pulled out very nicely, did you do any magic or is it easy to do with no specialized extractor?

[AndrewGarageU]

доброго дня . хочу запитати що то за пробка 1:57 і що має бути під нею? там має бути сітка чи магніт. типу фільтра. чи на таких двигунах нічого щоб відігравало роль фільтру не має

[plugmanjohnson]

Also where did you find all the replacement parts and everything? Also are there performance parts?

[akramkafaar]

This video is going to help me alot, thank you so much. Can you tell me did you torque the bolts by the head and rockers? Is there any timing I need to consider because I'm just replacing my piston rings

[plugmanjohnson]

You make it seem effortless. My engine looks very similar to yours and this gave me some confidence until the machine elves took my comprehension

[Gokraut]

i have a lifan 200cc 163fml push pod and im not sure if you speak english but i totally ruined the cable connection to my clutch actuator and i can't find the correct one can anone help, i was hoping ididnt have to take it apart but i guess i have to so i can find out which arm will work.

[duvanandresduranojeda]

Compañero, ¿de cuantos dientes es el piñon que va debajo del centrifugo?, el que mueve la corona de clutch.
¿Es de 23T?

[roberteroli]

Hello, very good job, a small question, is there a manual to download in pdf? And how is the electronic circuit connected?

[germanserantes-yu]

IN in the piston means intake, it goes in the side of intake you put it wrong mate

[Le_supermot__braap]

Hello lien of segments and cylinders please 😁??

[josejamiltonsantosjerez]

Buenas, en Dominicana donde encuentro respuestas de motor Loncin 200 CR5 año 2015, motor LC163FMLNQ19798?

[RedouaneGilblas-hb]

Bonjour j’ai un moteur 150 Loncin qui pétarade et fait des retour de flamme je pence au soupape je voulais savoir le jeux au soupape admi/échappement sa serait cool