HP 15 Laptop Keyboard Replacement, Full Dissembling Guide

hp 15 - ac132ne model keyboard replacement, full diassembling guide. #technowdays

[RaveyDavey]

I use an old soldering iron to melt the little plastic rivets after replacing the metal plate. You push the tip of it down, vertically into the remainder of the rivet and it mushrooms out, re-creating the rivet head, albeit not perfectly. But it's good enough to stick the plate back down pretty firmly and needs no glue.

[johnsmallberries]

i need to do this for a co-worker - very helpful video! 👍

[ericlee]

very useful, I replaced the keyboard just like that but it has a little bit not at the same level of the frame due to must destory all the plastic sealed with the keyboard backward in factory.thanks a lot.

[LlamaOates]

But the keyboard metal retaining frame is plastic rivoted. So when you pulled over that metal cover you snapped all the plastic heads off. You can't just put the metal frame back on it will flop about, which will explain why your videos stopped at that point.

[vvtrinadh]

I need to do this, where will we get the keyboard, provide the link from where we can get the spare parts

[steven]

Hello. can you tell me the model number of this laptop please?

[hawie]

this one is such a pain in the ass to replace the keyboard 😭

[bhanugudur]

Can you provide me keyboard buying link

[JamesChasingSunrises]

Wow this is the most unprofessional job I've ever seen. You just forcibly popped all the plastic rivets off which makes it impossible to securely remount them. You can see at the end of the video nothing is secure.