Lenovo Ideapad Charger Port Quick Repair

In this video i am repairing a charger port on an Lenovo Ideapad
due to the nature of the port failure i am able to solder the the broken pin back on the back of the charger Jack

================================================

================================================
Tools that i use frequently that are Ali-express Affiliate linked

This is the Blue Pad i always have on my videos usually set at 60 Oc
I use this to soften adhesive on mobile devices.

my go to glue for almost everything now days!

Used to open ipad and remove glued back covers on phones

When using the heat gun near sensitive parts, its best to cover them
With this to protect them

The usual tape i use on most repairs, on screens

For things that need more Stick!,usually on tablet digitizers

A Similar tool kit to mine, that i use for those random screws that you dont normally see

My Soldering Station i use, so far it has been good

This was a purchase to learn a bit more in micro soldering
So far it has been a great purchase

Advanced readouts of power draw on devices

A Simple Amp tester to see if your charger is actually putting out power

The Black Tweezers i use in my videos

This is the same as the metal pry tool i use, different brand printed on it

A New Version of the pry tools

This is the kit i purchased to do micro soldering, if you see a video
of me micro soldering it was captured on this cameras feed

The Charging station i use out the back, usually having multiple devices connected
Doesn't support Fast charging but still does a good job

One page i go to when I'm curious what new repair tools are out is:

[briand]

I fixed my lenovo think pad the same way. The leg into the board was a bit loose and I pushed it back to the jack and closed the gap. I put a blob of flux on the break before soldering. I am hoping the dry joint will be ok, The tablet is charging ok now. If the dry joint gives problems in the future I will have to take out the system board and try and solder from underneath. Thanks for your video which showed me where to look.

[beeshoney]

What if the charger is wiggling in the port?

[frankhenninger]

Good day Rick, I've got a kid who managed to break the pin inside the port, any idea where I can order a replacement jack?

[LanceJudd]

Appreciate your video, thank you! I suspected the wire was broken on a customer's laptop, just like the one you have here.

[rob-whns]

A closeup pick would have been nice does the bottom of the laptop come off easy

[ScapeSmart]

Hello, thanks for the video. one question, what type of solder wire did you use? thanks

[saketgautam]

Does this laptop have attached charging port to motherboard?? So do i need to replace the whole motherboard or can only the port be changed?

[jamesbondaygee]

my t540 seems to have the same issue. I just plug it in and suddenly no power. the adapter is fine so I hope this turns out to be the same issue

[amyanne]

Can’t see thru the back of his head! 🤦🏼‍♀️

[badammdf]

Can’t see thru the back of his head!
µ