HOW-TO GET STM32 Board in ARDUINO using STM32duino

In this video, we'll show you how to get the STM32 Board in the Arduino IDE. This is a great way to create projects with the STM32 Board!

If you're interested in learning how to use the STM32 Board in the Arduino IDE, then this video is for you! We'll teach you everything you need to know to get started with this powerful chip. After watching this video, you'll be able to create your own projects with the STM32 Board!

Github

Forum

STM32 Playlist

[fenix.]

A good step-by-step explanation. Helpful.

[kcpkcp]

This is good. I managed to upload Blink to my Nucleo L476RG and it was running . However i got garbage on my Serial Monitor when i run another program. The baud rate was correct. Any idea why this happened? Thanks

[gamercfd]

Quick question for you, is it necessary to use USB to power/program our dev board with the arduino IDE? My project requires our own custom development board with an STM32F103 MCU and I'm wondering if we need to include a female Micro-USB port. I plan on just using a J-LINK programmer with an SWD interface.

[Pashaur]

Hello.

I get "OpenOCD: GDB Server Quit Unexpectedly. See gdb-server output for more details." all times. ( Nucleo F103


Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD
Info : Listening on port 50004 for tcl connections
Info : Listening on port 50005 for telnet connections
Info : clock speed 1000 kHz
Error: libusb_open() failed with LIBUSB_ERROR_ACCESS
Error: open failed


[2025-01-10T15:46:59.679Z] SERVER CONSOLE DEBUG: onBackendConnect: gdb-server session closed
GDB server session ended. This terminal will be reused, waiting for next session to start...

[MizzardNetNet]

but do you have to install STMCubeProgrammer?

If so, why didn't you EXPLAIN IT??!!