How to Replace Blower Motor Resistor Skoda Roomster Skoda Fabia

How to Replace Blower Motor Resistor Skoda 6Q0959263A
How to replace passenger airbag Skoda
In the film there is a slight mistake, there is a Torx27 but there is supposed to be Torx30.

*************************************

- I'd love to hear your thoughts. Please comment, like and let me know what you'd like to see next.

Subscribe for the latest videos:

Music:

#knemo #blowerMotor #blowerMotorResistor #resistorSkoda #skodaResistor

[eddiboye]

Worked like a charm on my Roomster 2007. Bought the blower resistor off ebay for 17 dollars. The work itself took med all and all 40 minutes. Had a bit difficulites clicking on the new resistor. Couldnt twist it back fully but nevertheless, it was secured in it´s place. Now alla speeds on the fan are working. Prior to this operation I hade zero effect on level 1 and 2. Thank you so much for this video! Your effort saves a lot of money and time for us all! I take my hat off for you Sir!

[adamcooper]

Brilliant video, the workshop manual says to remove the whole dashboard to gain access, so seeing this has made it 1000x easier. Thanks for putting in the effort.

[andybraithwaite]

Great and very helpful video that saved having to take the car to a garage for a simple fault. Got a replacement resistor off eBay and got the job done in half an hour. Read other comments and followed tips like blu-tac on the torx driver. Once I removed the airbag T30 screws, it was loose and I could see that it just needed to be levered up with a large screw driver to pop it out of the dash top. This was helped with some plastic trim levers I already had. Managed to do it without disconnecting the air bag too. The hardest part has re-installing the airbag top cover but once I realised how it clipped back in it was no problem. Thanks for posting.

[robinsimmons]

I'm very grateful to you for this. It was a fairly simple job and took only 30 minutes. The hardest bit was getting the new component to seat and lock in place. There is very little to lever against when using a screwdriver to remove the airbag, but the end of the lug on the far right can be lifted against the steel bracket below it.

[gregoraquillusx]

Dziękuję za doskonay instruktaż, właśnie skończyłem wymianę całego modulu, krok po kroku jak na filmie. Koszt to 9£ a satysfakcja ze zrobienia bezcenna. Dziękuję i pozdrawiam.

[ScarboroughGalaxy]

Thanks, worked a treat on my 2011 Fabia. I did buy the whole fan resister unit for about £10 from Amazon. It then just took about 45 minutes to fit 😎

[marksweeney]

Great instructions - worked a treat. I bought some car plastic panel removal tools (approx £6) worth it so no damage to lifting air bag panel. The air bag panel removal is the hardest part! - Thank you

[MarcineXLC]

Mistrzostwo, najlepszy tutorial jaki znalazłem w internecie. Dmuchawa smiga jak nowa. Dzieki wielkie 💪

[Quarms]

Very good video! Saved me a fortune! Bought the part of amazon with prime for £7.06. Skoda wanted £148!!!!

Took me 10 minutes to fit!

Life saver!

[fairmania]

Just did my 2013 Fabia with a replacement part from Ebay at £9, bit of a sod getting the airbag plug off and then back on, but all done in about half an hour, or so it seemed! Those Torx 30's are tight!! All done, fan working again, thanks very much for the vid, excellent help!!

[MightyReek]

Awesome instructions. I have the resistance burned for two years and I thought I'd have to remove the full panel of the car, after all it took me 5 minutes to have it out... If at least I'd know before also burning the vent switch...
Thanks mate!

[jjfoster]

Excellent video - just saved me £100 and 2 days off the road. Only took 30 minutes to do and no problems when connecting battery agai9n.
Just need to be very careful about NOT dropping airbag securing screws when removing them. Magnetic bit holder and cardboard used to cover holes just below the screws highly recommended.

[allanhope]

Thanks saved me money and this video helped me loads, job done in 34 mins, didn’t unplug the airbag, sat it to rightside on cloth. Omg airbag refit took a wee bit persuasion thanks.

[georgesaunders]

Great instructions, thank you. I didn't unplug the airbag as it looked a bit fiddly. The wires were just long enough I could lift it out and put to the side to reach the resistor.

[lt]

Hey man just wanted to say thanks, just fixed my wife's Fabia, my EX mechanic wanted to charge me $1500aud to do the job.
Your video made it very easy to do, it took me no more than 15 min.
Cheers

[skybluejmc]

thank you! that fixed my Skoda Fabia. also saved us over £190

[clewingriffith]

Fantastic video. Worked like a charm. I didn't even have to unplug the airbag unit.

[DavidSmith-iend]

Very helpful indeed, thank you. The airbag was the hardest part as others have said. These Fabias are robust cars overall.

[ingridbain]

Thank you for that, though you made it look easier than I found it to be. Mission accomplished.

[richardwillis]

Very helpful. The screwdriver wedging out the cover and bag is key to making the job easy. The other moves are clearly shown.
Many thanks.