How to Replace Blower Motor 09-14 Ford F-150

Buy Now!

1A Auto shows you how to repair, install, fix, change or replace a bad or broken blower motor. This video is applicable to the 09, 10, 11, 12, 13, 14 Ford F-150

This process should be similar on the following vehicles:
2009 Ford F150 Truck
2010 Ford F150 Truck
2011 Ford F150 Truck
2012 Ford F150 Truck
2013 Ford F150 Truck
2014 Ford F150 Truck

🔧 List of tools used:

Check out our playlist:

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[AAuto]

√ *Watch the Video*
√ *Do it Yourself*
√ *Save Money*

[michaelrogers]

I'm no mechanic but I was done start-to-finish in less than 20 minutes. Making sure I had the right tools ahead of time makes all the difference. Thank you!

[RBoas]

That back screw is, no joke, the hardest part of the job.

[glennwhitt-hsrh]

You guys are the best ! Especially this lady because she's very detail oriented and thorough and fast, the absolute best ! Thank you.

[cameronforeman]

I think I’ve learned more from Sue than my actual instructors when I was in mechanic school!

[awshelley]

You’re fast. Took me a considerable amount of time longer than 7 mins

[TrevynPlays]

Thank you for the video. I am not mechanically inclined but was about to get it done because of this video. It was a pain to get the new one in but got it done no more blower motor sounding like a jet taking off lol. No to mention my dealership wanted to charge me $525 for parts & labor smh. I got the part for $170 saved myself $355 that is a lot of money with everything going on in our world today.

[stevenvasquez]

Bought the blower motor for $100 bucks followed ur directions and saved alot of $$$ ! Thanks!

[zvjezdanamartella]

It' s much easier if you pull back the layers of carpet and padding, Dont need to remove them. Much less struggle

[dccowboy]

great video. Thanks for these. I was imagining a nightmare of twisting my hands into knots and this was super helpful.

[neverlate]

Very thoughtful for this video. Doing diagnostic on a 2012 f150 and determined it was the blower. Will definitely buy from you.

[justinb.]

I just successfully completed this procedure. The aftermarket part works great! She makes it look a lot more easy in the video! I really had to struggle to remove the old part and insert the new part. There is no extra room! The 8 mm ratchet wrench for the far screw was key! Nothing else fit in that space.

[Dhi-feeu]

I was thinking I may have to take it to the dealership to get it fixed. But this looked somewhat easy. Like u said, be patient. Great video like always.

[devinthomas]

Replaced the switch and the blower motor. Not a technical job but a tight spot to work in.
I could not fit under the dash to undo the screws so had my son take care of them.
Glad to have AC and heat again.
Thanks for the video

[boandjill]

Awesome! Thanks much. This is the best video on YT for this. I didn't need a new part; just had some debris in the fan cage. Removed the debris, reinstalled the blower, all is good.

[ossiemoore]

this video made it easy for me to replace the blower in my 2014 Ford F150 and buying from you or saved me a ton of money. Thank you so much.

[tombrantley]

Took an hour but I dropped a socket in the Good video. Thank you.

[LOUDROWDSTROUD]

Great video!! Thanks so much for the video placement and quality. Your explanations are simple and to the point, and I love how you showed that you tried different tools. Well done!! Cheers from Innisfil Ontario Canada!!

[learningdeveloper]

Thank you! I purchased a 2010 F150 XL two years ago. Got a great deal on it but always annoyed by a noisy blower fan. Just took it out, cleaned it (plastic wrapper was in there), and put it back. Noise is gone! If it ever goes out I know how to replace it quickly and cost effectively.

[justwanderin]

Thank you. I watch another video for this and the guy must of removed about a dozen bolts, I did not want to do that. But when he took the blower fan out it had a plastic cap thing in it that he said was probably from the Recirculate door/hinge ... I watched YOUR video, and it showed a much simpler way to remove the fan. THANKS, oh and mine had the same plastic cap thing in it. I don't care about recirculate but NOW the noise/vibration is gone and all is well. IT was Hard getting that back bolt off and on, but patience was the key. * I used a small 8m wrench on the back screw, could only rotate about 1/4 at a time *
THANKS !