HyperX Quadcast Teardown

This is a video I created to help others who want to personalize their mics. There wasn't any information online so I decided to test things out on my own. If anyone finds a better way to remove the top touch sensitive button without cutting a piece off the mic based on the information I gave in the vid, plz let me know in the comments. I am not responsible for anything you do to your mic. Do it at your own risk. You will need a small screwdriver, pliers, a small allen wrench, and glue.

[Dalton-Reed]

Fun fact, the volume nobs are now glued on and when pulled can sometimes break the plug that connects to the leds and mute button

[mustacheraptor]

can you please post how you modded the rgb lights that would be so helpful

[Lifewaytravel]

Lol the only video I found in youtube with disassembling. It seems not many people dare to do this 😁

[ThunderKat]

Do you need to take everything apart if you just seek to cover the LED light with some tape? To remove that annoying light...

[andreasdippold]

Thanks for subscription. Very helpful. 😊

[TheCryptoHobbyist]

Dude you are awesome, thanks for this! Please, can you make a tutorial for changing the led light, that would be so helpful for all the beginners like me that don´t know the way in electronics

[maxtonkilroy]

can you make a led light change tutorial?

[MrScottishDork]

This is a good walkthrough but would you be able to post a light change video? I want to change mine to blue lol

[TheVampireShark]

You don't have to use an Allen wrench to take the screws off, a screwdriver with a star bit works fine

[PlacidoYT]

what's the best way to clean the mic's surface? The top part seems a bit sticky if I damp it with cloth.

[ricardobernardofardo]

Thanks.
I just used this to screw my Mic, and I did it how I always did it, but for some reason,
it worked this time.

So yeah, thank you.

[anasrifai]

Hello thank you so much for this video i opened the top of my mic as you have suggested with hot air blower it was easy task but a little of patience.

My mic does show on my PC that is connected but my mic never turns on.

After dissassembly i found that i have a blown resistor.

I would like to see if anyone can measure the ohmage of this transistor so i can replace it.

[HakmanTim]

can u do a quadcast s teardown please?
i need an exploded view of it for my school project

[erintitmus]

this tutorial is pretty good but a note if you are doing the same thing you need to be so delicate with the insides as they are so fragile also I would recomend removng the top peice before you pull out the clear shell as it can rip the port out of the mute button

[CaseyNM]

hey man, do you have a better view of the LED on the top and the LEDs on the bottom ring? i want to know exacly what to get so i can change them, thanks

[iceyshoes]

Mine fell out of the stand like strings can you show how to put back in

[BradenSlayer]

there actually is a way to fix motherboard, but trust me a every day joe wont even go though the struggle you have to sand it down to the copper and add more copper then close the open wire with blue light resin

[TheSavageBountyHunter]

Can you do a video on fixing hyperx microphone 😢
Mine stopped working for some damn reason.. i dont have my receipt.. and im pretty sure it's past the 90 day return from best buy..
😭😭😭

[NoContent]

Appreciate the tutorial I will now change my color

[triwayys]

Thank you so much bro, you're a life saver