What is a Fire Alarm System?

▶ Check out the full blog post over at

=============================

Fire Alarm Systems are designed to alert us to an emergency so that we can take action to protect ourselves, staff and the general public.

Whatever the method of detection is, if the alarm is triggered, sounders will operate to warn people in the building that there may be a fire and to evacuate.

In this video, we will have a look at the structure and types of the “Fire Alarm Systems”.

The “Brain” of the system is the Fire Alarm Control Panel. It is the central hub for all of the detector signals to be wired to and provides a status indication to the users.

The unit can also be set up to simulate an alarm for use in routine Fire and evacuation drills, so all staff knows what action to take in the event of a real fire.

There are a wide array of different types, but we can divide them into groups including Heat detectors, Smoke detectors, Carbon Monoxide detectors, Multi-sensor detectors, and Manual Call Points.

A Heat detector can either work on a fixed temperature basis, where it will trigger an alarm if the temperature exceeds a pre-set value or they can work on the rate of change in temperature.

There are three basic types of smoke detectors including Ionization, Light Obscuring, and Light Scattering.

In the Light obscuring smoke detector, smoke interferes with a light beam between a light source and photocell. The photocell measures the amount of light it receives.

The variation in photocell output is being used to initiate an alarm. This type of detection can be used to protect large areas with the light source and photocell positioned some distance apart.

The light scattering smoke detector operates on the Tyndall effect; a photocell and light source are separated from each other by a darkened chamber such that the light source does not fall on the photocell.

The photocell output is being used to initiate an alarm.

Carbon monoxide detectors are known also as CO fire detectors and are electronic detectors used to indicate the outbreak of fire by sensing the level of carbon monoxide in the air.

Carbon Monoxide fire detectors use the same type of sensor as those in the home but are more sensitive and respond more quickly.

Carbon monoxide detectors have an electrochemical cell, which senses carbon monoxide, but not smoke or any other combustion products.

The Multi-sensor detectors combine inputs from both optical and heat sensors and process them using a sophisticated algorithm built into the detector circuitry.

When polled by the control panel the detector returns a value based on the combined responses from both the optical and heat sensors. They are designed to be sensitive to a wide range of fires.

A Manual Call Point or Break Glass Call Point is a device which enables personnel to raise the alarm by breaking the frangible element on the fascia; this then triggers the alarm.

Fire Alarm Systems can be broken down into four main types; “Conventional”, “Addressable”, “Intelligent Fire Systems” and “Wireless Systems”.

In a Conventional Fire Alarm System, physical cabling is used to interconnect several call points and detectors, the signals from which are wired back to the main control unit.

The detection principle of an Addressable System is the same as a Conventional System except that each detector is given a set Address (usually by means of a dip-switch) and the Control Panel can then determine exactly which detector or call point has initiated the alarm.

In our next type of System, which is an Intelligent Fire Alarm system, each detector effectively incorporates its own computer which evaluates the environment around it and communicates to the Control Panel whether there is a fire, fault or the detector head needs cleaning.

The final type of system we will consider is the Wireless Fire Alarm System. These are an effective alternative to traditional wired fire alarm systems for all applications.

=============================

Missed our most recent videos? Watch them here:

=============================

To stay up to date with our last videos and more lessons, make sure to subscribe to this YouTube channel:

=============================

=============================

#RealPars #electricalengineering #FireAlarmSystem

[danstankay]

This ain't a just a YouTube video. Its a lecture. Soo informative. The winding up was superb.
Great job. This is my favorite channel ever.

[tonyday]

I have been a fire engineer for 9 years now so I can say yes this video is good I loved how you guys broke down how detectors work and call points too if most of my clients would see this too might stop some call outs too.

[khaliddjama]

Thanks a lot realpars team for your efforts, I'm working in the control room of a compression unit since two years, and this is the first time when I highly understand our fire alarm system thanks to your video

[afzalibrahimmakba]

Short and simple but beautifully explained video. One of the best video found on the subject. Good work.

[zvladd]

This video is brilliant. I am studying for the FDNY exam and this is very helpful. Thank you

[mrqatari]

Thanks for the great effort, please make a video on Toxic and Flammable detectors, as well as Calibration of detector types

[karlfleming]

Very interesting! Im an apprentice electrician who hasn't got to wire much fire alarm systems yet. But this information definietly helps in showing the different methods of wiring! Thanks!

[ewouk]

Its nice to see that you included the xtralis osid detectors. With intelligent systems multiple panels can also be "networked" together

[cryzzn]

Really explained the basics very well. Well understood. Grateful if a complex fire alarm system with all types of components (repeater panels etc.) is explained.

[sameersalem]

Great job, thank you all realpars team

[nanagyambibi]

I just became a fire alarm project manager. This is great for a newbie like myself. Thank you!

[sophiarodriguez]

Wonderful, very coherent, it's clear that you spent a lot of time on this!!!

[celospiky]

I am an Instrumentation Engineer for oil and gas platform.. a lot of the instrumentation knowledge i learned from you Realpars.. Tq for your info

[LH-stpu]

i love how you explain, it very easy to understand, compact with knowledge. thanks a lot

[gmcdon]

Showed this to my family to explain to them what I actually do for a living! Very informative and useful for those who are new to the fire protection industry.

[RandomNorwegianGuy.]

As a Norwegian Telecommunications Technician, I work alot with fire systems. Autronica's autroprime and autrosafe accounts for about 80% of the systems, Schneider 15% and the last 5% is different kinds of random systems which are 20 years or older. Autronica systems is by far my favorite kind of fire system, with autroprime being my speciality

[humphreymakere]

Thanking you so much. I have no need of googling everything anymore... I have just subscribed to your channel

[phuciendj]

I was understand after watch this video. Thanks for your video

[Jorge_AS_Fernandes]

I love your videos, been watching it since long time. Awesome work!!
My suggestions for topics is about computer vision, machine learning and/or deep learning. Greetings from Portugal

[melchorsubingsubing]

Well good and well explained--- thank you team realpars