Typhon 3s differential maintenance.

How to,
Decided to clean out and replace the oil and bearings on the front and rear differential on the Typhon 3S and change the oil on the shocks but I have since replaced the shocks on the Typhon. Sorry this video was a little out of order from my last one.

[DRONEALD]

This is really helpfull. Thanks a lot. I'm new to the hobby and getting in to it and wanna/gonna buy me the typhon 3S so this comes in very handy by the time i need to do some maintenance. Cheers!

[gilbertrodriguez]

Great tutorial. It'll definitely help me with my typhon 3s as I was a little afraid of taking it apart and breaking something.

[tua]

Thank you for the awesome video. Really helpful and saving me a trip and money going to a hobby shop and paying for maintenance services. Also boost my confidence to do it on my own.

[tonysmith]

I pretty much know what I do on my rcs but watch your videos, having the same vehicles, just incase I miss something. Thanks for your maintenance vedios.

[jamesandgames]

Also thanks for the vid...I ran about 15 packs through my 3s typon and looking to same Maintenance on mine ....is figure that 1 mil would hook nice and last awhile...again thx it’s my first time opening one up and kinda daunting....great vids!!

[CommanderAstigRC]

Great bench and maintenance video brother. The 3/4s platform are easiest trucks to work on with modular form. the shocks are very well thought of design much easier to work on. Looking forward to seeing it rip out there again.stay safe and bash on brother

[joeshow]

Really appreciate all of the maintenance content, very helpful stuff.

[tonysmith]

Well found out too why it didn't want to take off straight. I had put the proline mx on it and they were great on handling and going where you pointed it. After 3-4 months I was taking it inside and noticed the tread was going low making it slide eazy and with hitting the throttle was like limited slip, one way or the other. Sooo I put the original back on and the tread is better on those even running them before getting the proline and after. The proline were even sticking to the shelf I laid the typhon on when I went to run again so I thought they were great tires until they lost traction even in a turn on grass.

[Thestudiedtheist]

Very helpful. I’m new to Arma, I had an hpi 1/8 monster truck before. I’m getting a 3s typhon in march 2022.

[Pursnikity_]

This in fact will be my first time messing with this when it’s time. So thanks for this vid! A-B-C-D. Thanks !

[rcpd]

Hardcore..went with the million! Can't wait for that!

[timallen]

In my limited experience with Fast Eddy bearings I really like them. Especially for the money. They are very reasonably priced.

[tonysmith]

That's the same problem I'm trying to fix. At first both rear wheels hooked up and would wheelie sometimes. Not sure why there are 2 different slipper clutch complete, 1 for the 3s blx s and one for the blx s and megas. The one in the diagram is the one for all 3s and megas and it ran straight from full throttle. Bought th one for 3s only and it pulls to the left at full throttle even with tightening the slipper. So I just replaced the pads on the one that came in it because it was slightly bent where the plate that hooks to the rear of the shaft and wobbled. Hard landing bent the slipper peg.

[Shadows-RC]

I know this is a 3yr old video, but I'd use silicone grease for plastic ring and pinion gears. White lithium gease is petroleum and will degrade/soften that plastic. Sil Glyde is a heavy-duty silicone grease that would be perfect for this. As for mesh, I'd put in a lot of time with various thickness shims to get it just right, instead of just trusting factory standard.

[chrisstevensrcadventures]

Thanks for the tips going to get mine on Friday

[ChrisCEdwards]

Nice. Was looking for something just like this thank you

[gazfpv]

Can't beat abit of servicing on ur RC cars bro 👍 nice info. 👍Peace out man. 👍 😊

[JonWatters-dgku]

I wish there was a video out showing how to take the front end apart to get to the diffs. I am new at tearing them apart

[choke]

HEY, BIG THANKYOU ON THIS VID. Thats an odd lookin diff! I had no idea. Guess its time i tear into mine. Gotta replace the sh1t servo tho 1st. I dont run it as much as some of my others, but other than the servo its been a good runnin buggy.

[blacksheeprc]

I had all the people that sub me yesterday I want to make sure you're still there cuz YouTube felt that they wasn't either active accounts or that they wasn't subscriptions gained normally seems how it's from a challenge or whatever so I want to make sure if yours ain't there if I could get that one back thanks man