Arrma Typhon 6s Differential maintenance.cleaning and new oil.

After The last few hard bashes I decided to open up and change the oil and make sure the differentials were in good shape before the new chassis transfer the car has had a rough life already this summer so it was needing some much overdue attention

If you would like to get a sticker or a T-shirt here is the link below

[gihonda]

This video really helped, I just purchased a used Typhon 6s BLX, and I wanted to change or inspect all the fluids. I was shocked when I took the front diff out and saw there was no fluid. This video has definitively helped.

[grandehombre]

Absolutely love your channel and all the details and practical maintenance walkthroughs you share. Thanks for uploading this.

[zeisslersrccars]

I am new to this hobby, i have a outcast 6s and run it for 3 or 4 runs. Now i want to see my diffs and your video is perfect for me.

[tonysmith]

Thank you for the runs and tech help vids. I am way late and you have worked on that thing enough times but all you have to do is the sway bar removal then the 4 cap screws for the diff housing. Then can pull straight out. Same with rear. Disconnect the sway bars at the arm and as you do the 4 same screws as the front, the ones by the sway bar, do it slowly and they will fit by to remove them. 👍 like I said you probably know that by now, if not just trying to cut time off your service.

[cacanjacowans]

Whenever that new chassis gets in try adding ALUMINUM F/R BRACES for better support. It definitely helps to prevent any bends, tweaks & chassis flex. Also I've been told that the 100K in the FRONT & 50K-80K in the REAR improves forward thrust & steering.... GOOD LUCK with your teardown and rebuild 👍🏾

[lrighttobewhite]

Good. Informative video! Thanks for sharing, mate 👍

[GyuHobbyRC]

Awesome admiration video!!! 👍
Very good!!! 😄😄😄😄😄

[mikestranzl]

Great information, aways looking to learn the maintenance side of the hobby!

[moereefer]

I need to get upgraded chassis bracing u get hot racing or m2c, JBRC ect….

[Zillawill]

I've started using HSS drill bits cut down for my diff pins, get a couple per bit if you don't use the drill part, if you do you can get few more

[_gunna]

What does the earplug do, and should i use it?

[djrvn]

What shock towers do u recommend mine got bent

[EXTREMERC]

Im getting a blue notorious afTer i sell my mojave exb. Planned to make it exb ish. The basics you need are alloy braces

[Swmngrown]

I seen you flipped upper arm back to normal at end of video lol 😆

[trimmin]

how do you get the sway bar off without taking the screw out of the back side of the A arm ? or is that the only way to get the sway bar off so you can get to the diff ?

[BHumla]

What is that small set screw at the bottom of the diff cup for, letting out excess fluid or air?

[jean-marcrevill]

What I don’t understand about shimming cars is why are they all different despite being the same?

[CorvetteC-LS]

What fluid I should use in the outcast exb 8s maestro ?? Which fluid in the from diff and what fluid in the rear?

[jonk]

Good stuff man, I am actually looking at changing my diff fluids soon. I replaced the center diff with 500K when I got the car, does the ear plugs make a noticeable difference?

[mididash]

Is one of your front top arms on back to front ? Great vid fella 👍🏻