How to Replace a 2010-2012 Ford Mustang Front Bumper | In Just 20 Minutes | Remove & Install Bumper

Hey, YouTube fam! Here's a quick tutorial on how to remove and replace your 2010-2012 Ford Mustang Front Bumper by yourself using everyday household tools you usually have in yours or a neighbor's home.

We're using a simple toolkit, but feel free to use power tools if you have those at home for a quicker install. Alright, we'll let's get to it!

00:00 Introduction
00:42 Locate bolts & screws to remove
01:01 Tools needed
02:00 Remove screws & bolts from bottom of front bumper
02:33 Remove screws & bolts from side of bumper
03:25 Remove screws & bolts from top of bumper
05:25 Remove front bumper from car
06:43 Unclip lights from bumper
07:12 Unplug headlights from bumper
08:21 Unplug sensors from front bumper
08:52 Painted front bumper replacement
09:11 Install new front bumper
12:18 Mount & fit front bumper
15:08 Screw bolts to secure bumper
18:54 Replace top cover

This is a super easy, quick tutorial that will show you step-by-step how to remove and replace your 2010, 2011, or 2012 Ford Mustang Front Bumper.

TOOLS NEEDED:
Socket wrench for the bolts. We also used a panel clip removal tool but you can also use a flat-head screwdriver.

PROCESS:
Underneath your Ford Mustang, remove the 7mm screws.
Steer the wheels for additional clearance within the wheel well. Loosen and remove the small 5mm bolts on each side of the front bumper.
Prop the hood and support the hood with the prop rod. Remove the pushpins securing the radiator cover, then remove the radiator cover.

Remove the outboard pushpins. Pull back the splash shield then loosen and remove the 10mm bolts on the front bumper to fender retaining nuts. Carefully dislodge the pushpin from the Mustang bumper to the fender bracket and set the bracket aside. (Repeat this step for both sides).

Bring the front bumper forward and disconnect any electrical connections.
The Ford Mustang front bumper can now be removed. To install the new Mustang front bumper, simply reverse the steps for the removal procedure.

Here are the OEM & Parts Link part numbers associated with the 2006-2009 bumpers you might use for this tutorial:
Base Model
OEM: AR3Z17D957AA
Parts Link: FO1000652
GT Models
OEM: AR3Z17D957BA
Parts Link: FO1000646

Follow Us to check out what we're up to!

________________________________________________________
#fordmustang #mustanggt #howto #revemoto #paintedautoparts #DIY #bumperrepair #installation #mustang #ford #fordmustang #americanmuscle #mustangfanclub

DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness, or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[charlie]

unless you upgraded to a 2010 t0 2013 front bumper thats doesn't look like an 05 to 09 front bumper cover

[POOL_EXCAVATIONS]

Can you replace just the plastic piece on the bottom

[nathannoble]

Seven and thirty two? You gotta be kidding? Seven thirty second(s) 7/32.. SMH