Fix pipe leaking | Pro Poxy20 Epoxy |copper drain pipe

Product Features:

-Pro Poxy20 makes steel-reinforced repairs in just 20 minutes!

-Seals, mends, bonds, and repairs almost anything--even under water.

-Single stick two-part epoxy compound mixes quickly and easily and adheres to metals, masonry, wood, glass, ceramics and some plastics.

-Can be applied to damp or wet surfaces
Withstands temperatures to 300º F
Resistant to many acids, caustics, fuel oil gasoline and other solvents.

-Compression strength 18,000 psi, tensile strength 6,000 psi.

-When cured in 20 minutes, may be drilled, sanded, filed and painted.

[shannonleighkelly]

I did this fix on my drain pipe for a temporary fix. I used the stuff that works on wet surfaces, but i still dried the area as best as I could. Then i cut a pair of rubber dish gloves and wrapped it around the pipe and tied it until it dried to prevent the puddy from forming any air pockets underneath from any residual water leaking out. (I didn't fully trust the epoxy). Sure enough, it held! Then I covered the entire circumference with liquid epoxy for metal, such as JP Weld. It's solid and not going anywhere, and gives me time to save up for a plumber to redo the pipes.🤙🏼

[mike]

Excellent video and great temporary solution to stop the leaking until the pipes can be replaced.

[generalj]

Great video and very informative but for those who are reading comments I will urge you to make sure the surface is dry and not damp at all, drain the water, dry off the area to the best of your ability and then apply as so!

[jdantigua]

Great video. However, also good to add electrical take to keep the epoxy in place until it is fully cured to the pipe.

[arronwilliams]

Good video JB Weld has a water epoxy that is a Life saver but TEMP FIX!

[matguillaume]

Thank you for this great video. I have a leak on one the pipe and Home Depot recommended. I just found your video and you are a good teacher the way you demonstrated it in video. Great job. I subscribed on your YouTube channel.

[HorrorFreakNY]

That’s some good stuff man. I have used it many times. Just subbed.

[nassah]

Do you think it's worth wrapping some ptfe tale ontop once it sets fir a longer repair?

[tonyogrady]

How about plastic heating oil tank drip with head pressure! Was told cant be stopped.

[richardlawrason]

Could work well but if pipe wall is comprised, thin rusted or what have you you can make it lot worse pushing this in hole and making hole bigger.Used on copper not good outcome for me but wish you better results.

[jackiewong]

Great video. Can it be used on cast iron?

[Sephiroce]

Is the water safe to drink when this is applied after?

[commonsensegaming]

my hole is twice that size. i hope i can patch it untill i can get a plumber to replace the pipe. hope this works

[michaelneal]

does this ever cure white? I have this weird plumbing this where and old fix came a a part. It has this white stuff where it was sealed and it was a mating of same size pipes with the white stuff.

[ethandumas]

How do i make sure the pipe is dry from.the inside before applying please

[datsquisheeboi]

Does this work with pipes that are under pressure? Like a ingoing water pipe

[johnsun]

I am worry that this stuff will get into the water how safe?