Kenmore washer diagnostic mode

[carolasmith]

Excellent recommendation! instead of making people to open the engine, you provided the most workable, easy solution.❤

[neilsherman]

Just tried, it worked! Note: I had to do this 4 times, then it worked just fine.
All this happened after putting the machine in “clean the washer” mode. Hope this tip helps!

[yogaidabagus]

Thank you so much. That's right to the point. It works

[milesorchowski]

So after you put it in diagnostic mode what do you do ? Just sit there and wait for it to do whatever it's going to do . ??or???

[hunterred]

This is great information no doubt @baraban916 . The problem is now, there is no manual inside the cabinet, I pulled the top and back open, and I cannot find a single mention of a service manual of any kind anywhere. AND no error codes show. Any hope in finding out what each of the few "modes" of diagnostic are? Someone mentioned up to 14, which there was not even close to that when I hit the start mode to cycle the was stages.

Whatever stages two and three are do not move and register a "0" (zero). Cycle 1 spins fine, the rest either do nothing and barely make a noise or, like when the washer is turned on normally for a wash, it buzzes like it is going to start but does nothing but buzz.

Any help would be greatly appreciated, no close laundromats - plus why would I want to pay that when I have the machines?

[markdziamski]

My just spins when I do this. It doesn’t fill with water

[brandyevitts]

Thank you!!!! Was searching everywhere for this!!

[GabrielBoboc-qhwv]

did Kenmore stole LG washer board? YES!

[NoraFlores-ky]

The washer turn on and is on with all light on sensors on and now it has flashing code 49-50 on and on. what do i do now?

[somashreeroy]

Sears took lg washer and slapped the Kenmore logo on it

[elizabethpalacios]

My has like a tE icon and It won’t do anything like wash, or it won’t let me use any cycle

[dtowers]

Mine alternates between dE1 & dE2 so the door won't open unless I unplug for 30 seconds then plug back in. Luckily the wash didn’t start but now I dont know what to do from there. I can get it open but as soon as I attempt to wash, the error codes pop up.

[doodstoopid]

Have this washer and it shut off mid cycle and not responding when pushing power button. Tested electrical and there’s power to the button. Happen to have the service manual you could send me?

[NaeBang]

Anyone's start button not working?

[cliffwheeler]

What do I do when it’s the bottom washer that is flashing the DE3 code…….?

[pcexpress]

If this machine doesn't drain, could it be something other then the pump like the control panel? Would this test or some other test confirm this issue is the pump (or other component) for non draining washer, machine?

[giovannagonzalez]

What is that for?
I would like to know how I can chose the water level in mine please

[orlandogalo]

I get uo1 and d51 in this mode the washer spins but when on regular it wont spin

[redrevolver]

For how long do I have to wait for each cycle?

[dvdpldinh]

Please! Why cool hose water keep fill in spite of during washing