How to use Infinity CM2 QLM to flash Qualcomm firmware

This video explains how to flash firmware to Qualcomm devices using Infinity CM2 QLM

Ensure to only flash firmware for your phone mode to avoid bricking it.

Drop a comment below if you have questions or reach out to us on the following platforms:

00:09
In this video tutorial, I'll be explaining how to flash a Qualcomm Android phone using Infinity Chinese Miracle

00:17
2 QLM module. You're going to of course need the module (which I'm going to be installing).

00:28
You're going to need the firmware (it looks something like this). First off, you'll want to install the CM2 QLM

00:42
module. I should mention that you're supposed to install drivers. in order to allow CM2 QLM detect your

00:50
Qualcomm Android phone. We have a guide on that, check out our Forum. Follow that guide to

00:55
setup your drivers. Also, you should have the hardware dongle and connect it to the PC's USB port.

01:05
You're going to need your drivers and the dongle to pull this off. I'm already installing the CM2 QML module

01:18
Installation is done [closing installer]. At this point, you'll want to launch the Cm2 QLM module.

01:28
Make sure you have your hardware dongle already connected to the PC. It usually takes a while to come up

01:36
Alright! Its up right now. Head over to the Flash tab. Click on Select. A Window should popup. In this Window

02:01
navigate to the firmware folder or where you have your backup. Select the XML file then you click on Open.

02:08
Now, the firmware should get detected. Click on Flash. You can always untick any of these boxes if you want.

02:27
Alright, you have Wait for phone.. Power off the phone now, still with battery inside, hold both volume buttons

02:42
then connect the phone to the PC via USB cord. It should get detected just like this. The phone is in EDL Mode.

02:49
Flashing should commence. I'm going to pause (recording) here because it takes a while to flash.

03:02
[flashing firmware] Alright! flashing is done and I have a Done message. So that's basically how to flash

03:24
a Qualcomm Android phone using Chinese Miracle II QLM module. --------------------------
Hire Or Consult Us

Join Our Training

[spacetm]

Dear Sir, Can you please tell me how can i repair my original IMEI of ZTE MF79S 4G DONGLE. I have tried every thing but failed :( .

[atortea]

if you cannot speak English - don't speak. 4kin Indian pronunciation: just make the text on screen!

[MegaAgent]

i have backed up my phone firmware using ICM Qlm 1.16..is this how i flash it??

[akinkunmi]

please, help me out my cm2 qlm is not open, spd, mtk, scr are working properly. only qlm is not open

[MegaAgent]

Can I use this WITHOUT A BOX/DONGLE???