Improve Your Surround Sound Experience, Basic Speaker Level Matching

Do you feel your Atmos or surround speakers are not performing enough, try this and you will definitely feel a better experience.

SPL Meter
Speaker Level Matching
Atmos
Surround
Improve the cinematic experience

==========================================================================
My Other uploads

Speaker Reviews,

Subwoofers,

Power amplifiers and AVR

Projectors,

==========================================================================

[mangeshiyer]

Knowledgeable teaching thanks alot sir 👍🙏

[mafosa]

I do mine differently.
After audssey. I set all the trims to zero. I start with the center channel using the master volume. Bring it to 75 dbls. From there I use only the trim to achieve 75 dbls. On all the other speakers. It really comes alive during movies!!

You still have a great share!!

[harmangrewal]

The way u explain things it quite easy to under stand . Thnkew very much.
I have a one query after audyssey calibration subwoofer sound very low no bass at all.
Could u guide me about it thnx.

And also i have question is it ok to watch movies at 0db reference level because lower than that can’t listen dialogue.

I have denon x3800h 7.1.2
Monitor audio bronze series
Thnx 🙏🏻

[yogabyaakaash]

do you prefer to calibrate speakers to 70db when most look at 75db as reference. Also, the general consensus is to set the master volume to 0 and then calibrate speaker levels, so 0 becomes reference for 70db or 75db. Thanks

[balnanj]

Great video. This is what I use at home.
Avr - denon x1500h
Front LR - fs52
Center - svs prime
Surround - Polk fxia4
Sub- svs pb1000

Now the issue I face is sound is not enveloping. Sometimes music is loud, fights are loud, sometimes vocals are loud. I do only a audyssey

[Audioenthusatic]

8805A Marantz is Flagship model..vedio is so good and explained very well!

[canarat]

Is it safe to increase db by +5 or something like that? I want my center just a little bit louder. Could i damage the speaker/reciever setting an individual speaker too high?

[VipinPG]

Awesome Thanks for this Video. Could you please do a video on how to connect Emotiva XPA 3 3 channel amplifier to the AV receiver, Thanks in advance

[karthikeyankarthikeyan]

Put video for cross over settings in av receiver for surround and high speakers

[dannyr]

My Onkyo receiver is absolute 0 to 99 and i was told to calibrate at 75 or 80 volume so i used 80 but when I'm measuring with my spl meter i get 73 db and my numbers are positive and to get 75db for all my speakers i would have to increase the numbers which I've been that all the numbers should be negative

[rtyhhytyty]

Pl give the frequency levels set to speakers ..is 80 hz good for all speakers or different frequencies required

[YusufPiskin]

Hello. I am using sony str-dn1080 amplifier. Why are the level settings set to - instead of +? The general opinion is that this setting is the volume setting. What is the most significant difference between making a speaker -5 and +5?

[Audioenthusatic]

Can you pls tell me, which speakers configuration have you been selected....which meanbi have seen only one speakers on sourround back!!

[sukhsrboss]

What if you set the DB to say +5? Instead of - 3? Yes it's louder but isn't that better?

[melee]

Can you please provide the details and the links to buy the Mic, REW Software and the cable? I have having trouble locating these things.

[TheNLHAZE]

Thank you please come again I need $7 on pump number 3.

[ShaileshPatel-lecq]

I have received YAPO with yamaha AVR. As per your video I have to attached one site of YAPO with Laptop n YAPO to be fix on Tripod to our sitting position. I do not understand which cable other side you attached with laptop with AVR.

[harmangrewal]

I have denon x3800h .
After audyssey calibration my sw is sounding very low . There is no bass at all any idea?

[ShaileshPatel-lecq]

I m not getting REW free software. Pl send link or web site name address

[sriharigudisa]

Sir tell best 4k Blu ray player below 15k?