How to Install Steering Wheel Controls *NO MODULE OR ADAPTER* TOYOTA 2009-2011

Maintain built in steering wheel controls on any Toyota 2009- 2011.

**IF YOUR RADIO DOSN'T HAVE A "SWC GROUND" WIRE** - make one (connect a new wire from plug 6 to any grounding point)

Most cars are the same, may need to look up your specific vehicle's wiring diagram.

Link for Toyota SWC Diagram:

[rick]

You are the man, sir! Found the exact same harness in my vehicle. Key one is brown, key two is yellow in the 2010 Camry XLE(JBL) four-cylinder. Exact same pin locations as you said. Worked the first time. Thank you sir.

[dalehawkins]

Two years later, and this video is still very helpful! Thank you for putting this out there!

[godima]

You saved me a lot of money no buying a canbus kit in my Toyota Verso 2009. Worked perfectly. Thanks a lot!!! Gorka.

[aaabbb-pyxd]

Subscribed!!! even though I only needed this one video. Your own 3 hours wasted and however many more required to make this video was 3+ hours saved for me. Thanks very very much. The freely available Camry 2007-2011 wiring diagram book (found online) showed more connections on this F8 connector than was available on the headunit connector, leading to my initial confusion. And for anyone else using book, sw1 means key1, sw2 means key2, and swg means ground. I wish you had a donate button because this video is so worth it.

[luvtrvl]

"There's no video on how to do it."

There is now! 😎 Thanks for the video, really appreciate it the graph on where the wires go.

[markc]

You're absolutely awesome! Your video has helped me solve a problem - I PAID for a new Kenwood stereo to be fitted in my Toyota by a professional Vehicle Audio specialist, they told me being a Japanese import it was impossible to do. So ive now been brave removed my stereo and looked for the wiring you pointed out, my friend helped me by soldering the wires etc and now it all works! Im in the UK to which complicates things, thanks so much for this brilliant information.

[KenHiroshi]

Tried doing this in 2011, failed. Thank goodness i found your video, spot on dude! I was *almost there* just had the wrong configuration and the $80 box i purchased never worked.
I feel like this will work, finally. Much appreciated!

[youcanthide]

OMG, you are correct this is the only video out there for this specific “Toyota” steering wheel control retention install. You’re the best, I appreciate you!!!

[demetriblake]

Best video I was driving for a year without my swc until I see the video this morning 😂😂

[ashikchesust]

Nice and simple. Worked. So easily explained. Thanks.

[ramonmunoz]

You save my day
Thanks
Same 3 wires and conector on Toyota auris hybrid 2010
Working in Atoto A6 pf unit

[thecookeman]

Excellent video. I added a is350 steering shell to my older 1is and followed what you did here connecting the direct direct to key 1 and key 2. I hooked it up the audio controls to an Android unit. Just use key 1 to brown, and key 2 to grey. White to audio ground. And program with swc settings in android app. Boom thanks again!

No can bus module needed as it's an analog output which the chinese android can read

Thankyou so much for saving me buying a canbus module!

[matthewvela]

About time a video that helps!!!! Thank you!! Been pulling out my hair trying figure this out. Also with some plug and play cords they only have 1 key wire. I put them both on key 1 wire and it worked🎉

[alvarodelpinopinero]

Thank you very much. I bought a chinese android Headunit and thanks to your video i was able to make my Corolla Verso's steering controll works. Best regards from Spain

[franciscoamaya]

Thank you I have replaced my radio on my 11 tundra but didn’t have my steering control and thanks to you now I can get it to work 😊

[milan]

It works like a charm on my Toyota e12 2006. But I had some difficulties at the very beginning. On my Android HU only key 2 is marked, I have to find key 1 and the ground wire myself. There are also additional settings on the HU in the factory settings to make it suitable for my car. But overall this post helped me a lot, I thought there is no way to connect wheel controls without adapter. Thank you very much and God bless you!

[obinnaokwumo]

Thanks alot this is the only video to connect Corolla SWC saved me cutting all my wires just to test for the right one

[toneyellison]

For this video you made...you have become a living legend 😊 Thanks a trillion times

[repomannen]

Thx allot 2010 rav4 European, exactly as shown in your vid, only thing was my head unit did not have a ground, i just used the main ground, works fine.

[madmaduk]

2006 RAV4 UK. The wire colors may differ for my car but the plug, pin placements etc do not so it worked first attempt. Thank-you very much for you guide.