How High Can My Water Pump Lift Water?

preview_player
Показать описание
What does "Total Head Lift" mean? Our pump expert explains how to determine how high and how far a water pump can move water, so you can get the right type of water pump you need for the job.

___
The product experts at Power Equipment Direct answer your most common power equipment questions.

Thanks for watching!
Рекомендации по теме
Комментарии
Автор

Thanks for the information. It's exactly what I was looking for

deelos
Автор

Would you happen to know how long of a hose i could put on a 212cc 2 inch pump? Not lifting water just moving it from one area in yard to another, thank you

Fishflorida
Автор

Hi, if I have a gas powered pump outside a basement garage that can discharge directly to ground with no lift needed but the intake hose is 30-50 feet in the garage below (access through a stairwell), do you see any flow issues with any pumps rated at 85 ft ? Side note : the water pumped out is dirty water from pressure cleaning/washing a garage floor (max of 14 gpm) where the sand/dirt will clog the drains.

TaeKenDo
Автор

Its very interesting topic but my question is suppose the pump is limited up to 25ft suction lift is it possible to prime to satisfy the max.suction lift?Is priming method effective especially in hills.Thank you.

rogermoda
Автор

Good day, I have a Honda WX10T thats rated for 37m. It has a 1in discharge port. I used a bell reducer to reduce from 1 in to 3/4 in PE pipe. The PE pipe is 150m with approximate elevation of 30m to destination. But the water was not able to reach the required elevation. If i used a 1 in PE pipe, would it be able to reach max Total head of 37m?

mybaroroy
Автор

I have a 15 meters vertical well my gasoline has a total head of 28 meters, does that mean it can pump the water out?

DOI_ARTS
Автор

What is the best pressurized water pump that can pump water in 1 km in a 70°inclination

DaniloBanisa
Автор

Is it possible to lift the river water @ least 200ft.up hills using multi-stage in-line centrifugal pump?Or else just to prime the suction side of the pump first before start-up.

rogermoda
Автор

Sir kindly help can a 6.5Hp pump push water at a distance of 100m from water source?

CordrayNgosa
Автор

Hello i have one queistion. I have that pump. ITs Honda 3". I have some pipes in the field that are 2" diameter. Would it increase the suction pressure for 21 feet deep pipe in water well that is 90 feet deep if i reduce that suction pipe from 3" to 2"

Vulecro
Автор

Hello, I'm looking between a 2500 gph & 4500 gph for a backyard pond waterfall. I'm fairly new at this. The waterfall starts at 6 feet elevation about 20 feet away from the pond and flows over a rock formation (20 ft long) gradually decending until it reaches a 24 inch cliff at the end which spills into the pond. The entire width of the decending water feature & cliff is 16 inches wide. (So fairly narrow) I would like a decent flow. The 2500 has a head lift of 19 ft and the 4500 has head lift of 23 ft. Which would you suggest? Would the 2500 be enough? Is 4500 overkill? Thanks in advance. 🙂

theofficialgreenkane
Автор

What would I need to pump water on a slight uphill incline about 200 ft. This would be used to run a series of sprinklers. It is coming from a rain storage tank. I would have several zones to water an orchard, garden, etc.

EarlybirdFarmSC
Автор

I understand total lift, but what about distance. I'm trying to bring water up a hill 50ft that will need a hose 100ft. Is that possible with a pump that has a total lift of 100

brianschultz
Автор

Can it pull water from 70 meters deep?

festusgunsmokeannanias
Автор

I have to pull water from 1.5km away from my residence please guide me in the situation. i have to install the pump at my home

naveedhussain
Автор

Can you increase the head lift by reducing the outlet diameter of the discharge hose

josil
Автор

sir good evening, i have gas water pump that has 7m suction height but my well is 15m depth, what shall i do, pls give me an advice

junelorde